Vertex_FR

WTS : [WTS] I5 13600KF - SP G92-P103-E71 / MC 73 8266c34 GB3 (on Z690 Tachyon, 6800c34 gskill kit limited to 8200c34 on APEX Z790 and 13900K that can do 8450C34 with TG 7200C34 kit) 5959 GB3 / R20 5900 Ycruncher 320€ + shipping SOLD

do you seen some diff with X6N about mem score with tRCDWR ? BTW 16,6K mem score is awesome! Have you tryed to do max freq ?

Tested X6N on Z690 Tachyon last week. TRCDWR give a least around 300 pts on mem score. Profile train and bench easy at 8200C34. i5 13600KF 55 / 50 VCCSA 1.25V VDDQ 1.3V VDD2 1.4V VDD mem 1.6V VDDQ mem 1.55V no fast boot

how much with shipping to EU?

Oh thank ! i've looked my account 3 or 4 time because of that x)

hello, I'm interrested on the TEK9 V5. how much for shipping to France ?

Hello, you need to find your own vddq cpu sweet spot. it can be 1.2V or 1.4 or 1.35 or 1.3 The value find must apss every benchmark you need. to find it some ppl use VST from Ycruncher to stress IMC at 7600C40 for 30min. the value used to pass it should be the value to be used daily/bench.

Okay, I'm done With Z790 Aorus Elite AX. Now it's time to go with Z690 Tachyon. From my study : VCCINAUX help a lot to train, must be set to 1.9V VCCSA 1.25V to 1.3V for 8000-8200C34 is good enough VDDQ CPU need to be set to a sweet spot to get system stable. on Elite AX it seem to be 1,3V for my CPU but this voltage may vary depend on CPU used. VDD2 1.4V for 7800C34, 1.45V for 8000C34 and 1.5V for 8000C34 tight / 8200C34 VDD and VDDQ mem must be set to sweet spot depending on the freq/memory profil. too much crash, too low crash. For training, round trip latency is enable by default, So leave it to auto. My voltage to bench GB3 8000C34 on Elite AX : VCCSA 1.3V VCCIN CPU AUX 1.9V VDDQ CPU 1.3V VDD2 1.5V (maybe less doable?) VDD MEM 1.575V VDDQ MEM 1.525V Fast boot disable RTL training enable RDEQ2 Gear mode 2 My voltage to bench GB3 8000C34 on Elite AX : VCCSA 1.3V VCCIN CPU AUX 1.9V VDDQ CPU 1.3V VDD2 1.5V (maybe less doable?) VDD MEM 1.625V VDDQ MEM 1.575V Fast boot disable RTL training enable RDEQ2 Gear mode 2 My voltage to bench GB3 7466C32 on Elite AX : VCCSA 1.25V VCCIN CPU AUX 1,8V VDDQ CPU 1.3V VDD2 1.4V VDD MEM 1.6V VDDQ MEM 1.55V Fast boot disable RTL training enable RDEQ2 Gear mode 2

set to auto

rollback to ELite AX to finish review. Train ez 8000C34 + bench GB3 Train a little longer 8200C34 VCCSA 1.25V VCCINAUX 1.9V VDDQ CPU 1.3V VDD2 1.45V VDD/VDDQ RAM 1.55V/1.5V (8000C34) VDD/VDDQ RAM 1.6V/1.55V (8000C34) timings set to 34 45 45 32 Fast boot disable no RTL training (can't post with it activated) Bios F3K from 06/01/23 Now i need to fine tune it

okay... news Tachyon. i can easy train and bench 7600c32 with mdie but still can't achieve 8000c34 adie. i dont know why

I returned teh Tachyon and ordered a new one... BTW Elite AX pass 7800C34

my last z690 tachyon was able to do 7800-8000c34 with a 12900ks... i really think this one is defekt. also i have a liquide mark right after mem slot, maybe a fab issue ?

on every bios i have 3F 54 and then when it pass 3F (rtl) it just doesn't go to post after normal 6E d5 but i have a 6E d5 ... on all freq above 7200

this is a binned 13600kf, it can do 8200c34 on z690 apex and this kit can do 8200c34 on elite ax this cpu can bench 7474c32 gb3 air mdie maybe a defekt tachyon ? i will received a second tachyon next week... also i tryed odt from your link, it doesn't help

i think this board is defekt ... can't even train 7800 in 1 dimm

6E d5 train fail in all bios

now i have a z790 tachyon and... it still doesn't post 8000c34 ?

thank, i will try again

that what i've done, f23a csm legacy on win10 mbr but i have this error while i try to falsh via fpt

bios before 11/20 aren't accurate for biscuit, on x4b inhave 102,2 and on x6h 96,3 on my 13600kf

i have error while try to flash bios via fpt

yes, my 12900ks was 93,4, and my current i5 13600kf is 96,1. both are great

yes this not the good version You need 081N with Renesas pmic

seems normal, nothing noted about biscuit on gigabyte website, i think there is only Z790 mother that have biscuit in last january bios