Vertex_FR

yes, i will try with X3K. if it doesn't work this board will be for sell more quickly...

mem set for 6000C30, but it doesnt train at all, got 0F directly and it need clear cmos to boot again. retry button or direct to bios doesnt work, cmos on board too. need to unplug psu and press cmos on IO

no changelog ? I will test it with my g7400, i can't go over 140bclk, 0F error

So, i've tested both bios... X3I with Sergmann profile -> no boot X3I with my 6800C30 profile(OK on 12900K) -> no boot F6d with only primary set at 30 40 40 28 and trefi to 65535 -> boot 6800 / 6933 / 7000 Max benchable on X3I 6956C30 Max benchable on F6d 7070C30 (can't pass 7140C30, got memory management) Also if i tight timings on F6d it no more boot.

17 Bios tested, 7 ddr5 kit tested, 4 cpu tested, cold and ambiant cooling on cpu. The board seem to be better day after day, but no one with it have achieve a 7000 on it. And also i personnaly killed 1 gskill kit on it (6000C36) and a teammate killed a 6400C32 kit on it. (maybe gskill problem) From what i know, this board run and train great 6600 for all user on X3 bios, some user can do 6800 with retail bios(doesnt work for everyone) and i'm the only that can do 6800 on X3 bios . RMA is not the solution, we just need binned board at higher freq like 7600 and not 7000 with a binned ES 10L kit. But it's not a problem with Tachyon, It's a generally problem with all the XOC Z690 board on the market. Like for 12900K and 12900KS we need "KS" XOC board prebinned at higher frequency.

I think this whole gen is faulty and we should throw all our hardware to trash. Stop benching and close HWbot

Nice ! i also can do 6800C32 on retail bios. not possible with XOC bios. Did you try the patriot kit on the Tachyon ?

Does someone have tested to activate rebar on X3I ? When i activate on bios it my windows wont boot. I got a error. I need it for my next session with dice, i will rebench the 6900xt because i'm not at my max

I will restest this evening, i still have 5kg of dice from my last session from saturday. this time i will try with mem under dice too.

Nice, thank you. i also switched to KS, no i can’t do 7000c30… max 6950c30. Need to solve it before next cold session

bench profil, boot instant at 6800, then bclk up to 7000 with GTL work with X3I 7000c30 X3H

Nice, i see it on Facebook. great job ! I have to test this bios too, maybe 7066 will be doable, but first i have to finish the writing of my test of Tachyon... I lost 1 day with my mem tests yerterday

This will be my main base for next bench session

I think 7000 will be my max in ambiant. I will improve it for my next dice session.

I'm borderline, even 7000c30 is running the edge

new test : 1.5v vdd2 not stable with full profile tight, 1.45v pass gb3 at 6933c30 1.4v vdd2 rebbot 6933c30 1.44v vdd2 pass 6933c30 , not pass 7000c30 1.45v vdd2 pass 6933c30 , pass 7000c30, not pass 7066c30 1.46v vdd2 pass djsiktra 7066c30 but bsod after that 1.47v vdd2 bsod

okay, i can boot 6800 c30 then increase bclk with GTL: Work in progress : Sa : 1.2v Dimm vdd : 1.6v Dimm vddq : 1.55v timings set : 6800 30 40 40 32 training set : RTL VDD/VDDQ 1.35V / VDD2 1.4V : used for full training at 6800c30 -> able to bench at 6800C30, 6933C30 not possible VDD/VDDQ 1.45V / VDD2 1.5V : used if no training needed at 6800c30 after train at 1.35v/1.4v -> able to bench at 6800C30 / 6933c30 / 7000C30 / 7066C30 not possible VDD/VDDQ 1.45V / VDD2 1.55V : used if no training needed at 6800c30 after train at 1.35v/1.4v -> able to bench at 6800C30 / 6933c30 / 7000C30 / 7066C30 not possible VDD/VDDQ 1.45V / VDD2 1.55V + increase of dimm vddq from 1.55 to 1.6v: used if no training needed at 6800c30 after train at 1.35v/1.4v -> able to bench at 6800C30 / 6933c30 / 7000C30 / 7066C30 not possible Nota : If i change vdd/vddq or vdd2 for 6800c30 training (initially 1.35v / 1.4v) it doesn't train at all, no 3F RTL training, just 2E - 54 endlessly

but i can boot 6800 30 40 40 28 with a full auto profil with the following voltage: SA : 1.2 VDD/VDDQ : 1.35V VDD2 : 1.4V any other settings for vdd/vddQ and vdd2 wont post

i have tryed you profile without modification on adata and team group, no post.

Also i have tested the F6d bios. Stability scale with vdd2 in my case, for 6800C32 on adata : 1.25v no boot / 1.3v boot bsod / 1.35v boot 7% Kharu / 1.4v boot 140% Kharu / 1.45v boot 1600% kharu for X bios it doesn't work like that, only 1.4v vdd2 work fine for me

Only Hynix now (3 hynix kit tested, 3 samsung tested) I'm using a adata lancer rgb kit 6000c40 with hynix IC, tested with 12900K, KF and 12100F. Now i have 2 kit : Adata hynix 6000C40 : boot up to 6666c30, benchable at 6800-6933C30 with bclk. Daily stable at 1.5v vdd 6600c30 Teamgroup Hynix 62000C38 : boot up to 6800c30, benchable at 680030, bclk oc crash on gb3. Daily not stable at 1.5v vdd 6600c30

I tryed it, no boot 3E - 54 : tested with 12900K + adata lancer RGB I will try with my team group 6200c38 after work

f6b doesn't work at all, i can't access to bios with my gtx660, and it doesnt train at all when i try to raise mem freq. F6d boot really fast 6800c32 on my TG 6200C38 kit. 7000 not possible atm, stuck at 6E - 5d - retrain

On last x bios you can disable rtl training, it will be like on retail bios. on x3h i can boot 6800c30 easily, with luck it boot 6933, just hurt on 3F(RTL training). And bench at 7000c30(need bclk) not test the f6b now