Vertex_FR

8686c34 gb3, profile improveme't in progress

same setting with rdeq1 and mem at 1,65v 34 48 48 32 but not stable for Windows

8400c34 done, flare mode 1,3 sa 1,35 vddq 1,45 vdd2 1,6v mem vdd/vddq

thank, with cpu ramble i can boot into windows, gb3 dont pass djikstra but it's not crashing

thank, for now i will go with G2 and GB3 to try to improve my 8400c34 16,4k mem score that i got on x6v.

any tips about MCU ? btw 86x112 profile doesn't train for me on z690 crossflash Tachyon

everything sold

WTS : KPC TEK9 FAT : 120€ incl shipping to France, 140€ incl shipping to EU, 200USD incl shipping WW KPC MEMPOT DDR3 blue + CUSTOM DDR5 HS : 130€ incl shipping to France, 150€ incl shipping to EU, 185USD incl shipping WW KPC TREX REV2 + Custom backplate : 270€ incl shipping to France, 290€ incl shipping to EU, 380USD incl shipping WW Whole LN2 pot lot : 480€ incl shipping to France, 500€ incl shipping to EU, 700USD incl shipping WW Using Paypal, Paypal USD to EUR fee included, Other Paypal fee not included pictures bellow

Z690 Tachyon flashed with Z790 Tachyon Bios.

Z690 Tachyon flashed with Z790 Tachyon Bios.

Z690 Tachyon flashed with Z790 Tachyon Bios.

Z690 Tachyon flashed with Z790 Tachyon Bios.

You can't push more ring ? maybe 17K is doable ? I run 5.5Ghz ring on GB3 8350C34

Any tips for mem max freq on Tachyon ? I'm not stable above 9040 MT/s

WTS : [WTS] I5 13600KF - SP G92-P103-E71 / MC 73 8266c34 GB3 (on Z690 Tachyon, 6800c34 gskill kit limited to 8200c34 on APEX Z790 and 13900K that can do 8450C34 with TG 7200C34 kit) 5959 GB3 / R20 5900 Ycruncher 320€ + shipping SOLD

do you seen some diff with X6N about mem score with tRCDWR ? BTW 16,6K mem score is awesome! Have you tryed to do max freq ?

Tested X6N on Z690 Tachyon last week. TRCDWR give a least around 300 pts on mem score. Profile train and bench easy at 8200C34. i5 13600KF 55 / 50 VCCSA 1.25V VDDQ 1.3V VDD2 1.4V VDD mem 1.6V VDDQ mem 1.55V no fast boot

how much with shipping to EU?

Oh thank ! i've looked my account 3 or 4 time because of that x)

hello, I'm interrested on the TEK9 V5. how much for shipping to France ?

Hello, you need to find your own vddq cpu sweet spot. it can be 1.2V or 1.4 or 1.35 or 1.3 The value find must apss every benchmark you need. to find it some ppl use VST from Ycruncher to stress IMC at 7600C40 for 30min. the value used to pass it should be the value to be used daily/bench.

Okay, I'm done With Z790 Aorus Elite AX. Now it's time to go with Z690 Tachyon. From my study : VCCINAUX help a lot to train, must be set to 1.9V VCCSA 1.25V to 1.3V for 8000-8200C34 is good enough VDDQ CPU need to be set to a sweet spot to get system stable. on Elite AX it seem to be 1,3V for my CPU but this voltage may vary depend on CPU used. VDD2 1.4V for 7800C34, 1.45V for 8000C34 and 1.5V for 8000C34 tight / 8200C34 VDD and VDDQ mem must be set to sweet spot depending on the freq/memory profil. too much crash, too low crash. For training, round trip latency is enable by default, So leave it to auto. My voltage to bench GB3 8000C34 on Elite AX : VCCSA 1.3V VCCIN CPU AUX 1.9V VDDQ CPU 1.3V VDD2 1.5V (maybe less doable?) VDD MEM 1.575V VDDQ MEM 1.525V Fast boot disable RTL training enable RDEQ2 Gear mode 2 My voltage to bench GB3 8000C34 on Elite AX : VCCSA 1.3V VCCIN CPU AUX 1.9V VDDQ CPU 1.3V VDD2 1.5V (maybe less doable?) VDD MEM 1.625V VDDQ MEM 1.575V Fast boot disable RTL training enable RDEQ2 Gear mode 2 My voltage to bench GB3 7466C32 on Elite AX : VCCSA 1.25V VCCIN CPU AUX 1,8V VDDQ CPU 1.3V VDD2 1.4V VDD MEM 1.6V VDDQ MEM 1.55V Fast boot disable RTL training enable RDEQ2 Gear mode 2