-
Posts
547 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by phobosq
-
-
Just tested F6k for Z170 SOC Force and it has non-K OC locked
-
Things changed a bit in the meantime - it's delidded with DDM and tested on LN2, 5950 1M, 5700 R15, but it is a bit picky with PSC. PM me if still interested
-
Just checking - any progress on that?
-
Thanks, I'll rebench with SS as I ran out of LN2, will be an improvement anyway
-
Anyone had "unable to parse datafile" in AM3 with i3? I suspect that running 4 dimms is the case here, I noticed that AM3 wrapper shows "16 GB <OUT OF SPEC> DIMM".
Funny, because with 2 dimms it showed "Unknown Unknown" properly.
I take it that workaround is system info disabled but anyway it would be pity if I had to use backup that's more than 50k worse
-
keep pushing, can't wait to see sub 5
-
I think I fried my Impact, after last LN2 session it doesn't want to OC anymore - if I change settings from CMOS default eventually I get 41 code which afterwards is followed by 00 code with fans at 100%, after clear CMOS it boots (on stock ofc). Also the settings (multi, BCLK, voltages) I input in BIOS are not applied - everything runs on auto.
@websmile gave me an idea that maybe MEI could be the issue here, and it might be back to normal if I could recover it. But no idea how to do it.
I already tried flashing BIOSes 0205, 1302, 0002, 0014 - without success (with EZFlash or using USB Flashback). Rest of components - CPU, RAM, GPU - are OK, tested and working in GB Z170x SOCF. I also cleaned the CPU socket, checked that pins are OK, and checked RAM slots.
-
I have on my benchtable GB Z170X SOC Force, had both OCF and Impact previously. I can compare directly OC of my kit of RipjawsV 3200C16, which do 3733C12 with 1.85 vmem with my 6600k on both OCF and Impact easily with tight secondary and third timings, while on GB they don't post higher than 3333C14 no matter what voltage or subtimings. Tried that on BIOSes F5 and F6h. I also tried AFR (Fury Black 2666C15) but they didn't go higher then 3100C12, higher frequencies = no boot.
Main question - is it me or the board?
-
I like the "verstehen?" part
-
and what cooling, all air?
-
RULE has Geils 4000 19-25, those are B-die too -> http://forum.hwbot.org/showthread.php?t=150552
-
Breakthrough!
strong run, don't keep backups if you have them 
-
is there a converter from 775 to 478?
-
That's just sick.... great score!
-
Clear for me, going to look for mobo/CPU
-
Clock limit in XTU is 5000, while in other two stages is 5003, is it inconsistent by design?
Also HT is not mentioned, so I take it i5 competes with i7 here and loses.
-
-
Amazing mem clocks bull!
@phobosq just read back a few posts, it's delayed. It's not the only 2 DIMM board out there, so...
Thanks, I must have missed it
-
I'm a bit sick these days and don't think clearly, so I'll ask for a clarification - MOCF was officialy killed and will not hit the market?
-
Which GB board, apart from SOC Force and Gaming 7/G1, support higher memory multipliers than DDR4-3466?
-
Any LN2 results?
-
Rules for stage 2 and 3:
â–»Use any ASUS, Nvidia (reference) or AMD (reference) graphics card. No limitation in amount of GPUs.
â–»Use 1 videocard core(s) in total.
No idea what it means:
- multiple cards allowed? Strange, especially when Massman touched this few posts above mentioning "single GPU"
- dual-GPU cards allowed but one core disabled? - that might be my paranoia or overinterpretation, feel free to mock me
Please clarify.
-
YGPM, I'm interested
-
1
-
-
will someone finally score 742?
Dancop - Core i3 6320 @ 5001.6MHz - 9410 Points 3DMark11 Physics
in Result Discussions
Posted
Strong run!