
newlife
Members-
Posts
644 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Blogs
Everything posted by newlife
-
newlife - A8-6600K @ 5773.9MHz - 13sec 938ms SuperPi - 1M
newlife replied to newlife's topic in Result Discussions
Thanks Just keep in mind it's not as easy as it looks. First thing is that some hardware may not like the cold and may refuse to work or not work well. I also covered all the hardware in vas to protect against any dew which may form or ice which may melt. Also I used a old fridge/freezer because the seal on the door gets damaged by the cables which is something you don't want on a good one as it screws it. -
newlife - A8-6600K @ 5500MHz - 5060.11 pps HWBOT Prime
newlife replied to newlife's topic in Result Discussions
I found that to be the case with the CM V8 I tried How's that http://hwbot.org/submission/2657582_ -
newlife - A8-6600K @ 5500MHz - 5060.11 pps HWBOT Prime
newlife replied to newlife's topic in Result Discussions
It's a shame it's only using the stock cooler as at -20c it could be so much better -
PC in a freezer
-
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
Awesome improvement bones it's good to see -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
Insane!!! I pretty surprised you're a second ahead with twcl 8 and 2t. Do you gigabyte 990fx boards run twcl below 8 or are they locked as well? -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
Those 9xxx CPUs must have a pretty a good IMC and nonetheless 2600 c8 1t is awesome for AMD -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
Is cold on the CPU required for 2600 1t or can you do that on air/water? I can run up to 2475 1t and 2500 2t on water and 2600 2t on cold I'm also going to be getting some Dice today to give this a go at again and hopefully 3300mhz on the nb -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
Very nice time! I may give it another go on air but don't think I can beat that without cold -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
Yeah Samsung is volt happy and scales past 2.3v with my sticks on air -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
You never should've said anything and I owe a thanks to Zeroluszero for the final push in getting the mod done 14m 14.625s C8-9-9-8 1T TWCL5 @ 2.2v http://hwbot.org/submission/2644440_ -
newlife - A8-6600K @ 5407.3MHz - 4993.01 pps HWBOT Prime
newlife replied to buildzoid's topic in Result Discussions
+300mv on the CPU (1.6-1.7v) and +300mv on the NB as well as 1.9v on the ram which I've modded to run 2.2v+ -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
I'm not really sure as i don't know what the stock volts is but it's set to +300mv which I imagine is too much for water but I had to try booting 20 odd times before it would post with that nb -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
Since I'm impatient and suck at waiting here is my best run so far from a few days back. 14m 16.610s http://hwbot.org/submission/2642925_ I meant to do SPD tab not two Motherboard tabs -
newlife - A8-6600K @ 4997.8MHz - 14min 18sec 562ms SuperPi - 32M
newlife replied to KaRtA's topic in Result Discussions
They work great when you don't have an AMD mount better yet they only cost $1 for 50 -
Yeah it's great that you can save profiles just sucks the memory addresses change with every AB version
-
Dude no way. I don't know I missed it but ht is enabled which makes this as websmile said a joke and I won't believe that this legit without video proof within a few hundred ms but even then I'll still have doubts
-
here's my doggy attempt at a guide which is based on this http://forum.hwbot.org/showthread.php?t=68909 but different and using an apu as an example but process is the same for volts 1. Select Msi Afterburner in drop down menu and make sure it isn't minimized 2. Select search to bring up search tap 3. Enter the limit you wish to change such as vcore (1.35v becomes 1350) but anything but power limit works 4. Click on box and make sure only Integer 4 bytes is selected 5. Use the same address range but this may change with new ab versions 6. Click OK. 7.Green arrow adds all and red just the selected. 8. Change the value to change the limit in ab but this part is going to take trail and error to change the right value. Once changed it will take a second or two before it shows in ab. P.S. This intended for extreme cooling and is a hack so I'm not responsible for any damage in which it may/will cause
-
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
I finally got it submitted http://hwbot.org/submission/2640849_ That's what I was hoping you would say Awesome! Will be good to see -
Vishera/Richland SuperPI 32M 5G Challenge
newlife replied to Massman's topic in Trinity / Piledriver / Richland OC
G.Skill Samsung's vs G.Skill PSC 14m 18.562s I may or may not have backups -
No amount of sub timings will make up for 2400 c10 given haswell does best with 2800 c9 with Samsung's on air as this isn't AMD we are about and I doubt a win xp 64 bit based OS can do so well given how slow 64 bit xp is at 32m but I could be wrong since I've never tried windows sever for 32m