newlife

Test around the ic for resistors connected to ground and when you've done that test the resistance which should be something like 500ohm-5k (could be higher or lower) Post a picture as well as that will help

Yeah, don't trust Gpu-z 100% especially with gddr/ddr3 and funnily my Asus card is Nanya but shows as Samsung

That's Samsung (SEC) T-Die (last letter of part number) with a manufacture date of 1st week of 2016 (3 numbers next to SEC) and is BC package size (BC being small) and 11 Bin (1833mhz at a guess)

Awesome clocking card Dez

No problems with Gigabyte but the 3 cards I've got it had poor voltage scaling while asus and msi scaled very well and no Evga card so can't say about that one Oh and best of luck Actually I was wrong as my asus card is Nt5cb128m16ip-ek

Which card are you modding? And best of luck and if you or anybody needs help don't be afraid to aak

Hey mate this is just the physics score not the whole score

Same thing plus my 1g msi card is samsung S-die and no idea why clocks are better but at a guess it could be the Asus cards have a pci-e 8x size card as do gainward

Scott deserves those points because he's the one who found out 742 was possible after everyone thought 741 was the wall

That's pretty good for that voltage and shame about gpupi hopefully better luck next time and no idea about 01 worst case might need new os

Nice! Out of interest what clocks did you get ambient? And did you manage to break 6min 30 gpupi? Oh plus you seem to be missing rig shot

Yeah stock VRM and when I can be arsed I'll try this card with a epower

Edit cpuz.cfg and add xoc=1 and problem solved plus once saved set to read only so cpu z doesn't change it

Almost forgot but would have to be a dx11 bench like skydiver because dual graphics only works with directx 11

My Gigabyte cards scaled pretty poorly with volts but my msi card on the other hand scaled really well Best mems so far for me are nanya on Asus card

IMO 845 is fine because I think it only has availably problems in Australia (USA, Europe and Asia are fine afaik) and maybe igpu + discrete (r5 240/250)

The one asus card I had did 1260 at stock volts and a huge thanks for the datasheet because I looked far and wide for that but it confirmed what I thought the fb pin was

That's 1 benchmark out of how many where a 1080 has a advantage on ln2

Seems like it could be the result of some kind of instability

Nope but scaling is pretty poor past 1.45v but that's normal for Kelper And thanks, the msi card I got is a beast when overvolted Edit: When you hit OCP the card will basically shutoff and system crash with no bsod or anything

Card still has better in it

I've actually got a card that does 1600mhz+ with ambient cooling so I'd like to think 1800mhz on dice

Yeah my bad I did mean Ti

For a gpu that can do 2100mhz on air, 2500mhz is total junk and can't beat a 980

As long as it's GK208 and shows gt 710 in gpu-z it's fine All my cards are GK208-203-B1 but some might be GK208-301-A1 on the market only diffrence is B1 has a gdd3/gddr5 controller instead just gddr3