IvanCupa
-
Posts
102 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by IvanCupa
-
-
Hi, I just have time to mess with this Zen2 & C8I & C7H again when my TridentZ Neo arrived.
But I have strange issue, have 2 CPUs that can run FCLK 1900 (one at just 1.1vSOC) validated on X570 Godlike & low end board MSI B450 VDH+, passed memtest flawlessly (DDR4-3800 at 1900 FCLK 1:1 UCLK).
Back in Asus board I happen 1866 FCLK wall. At best I boot & see Windows logo start up and then keep rebooting. The other CPU just not pass POST at all (with IF issue POST code appear). And I have like DDR4-4600+ish suicide dual channel. When in the Godlike I hit DDR4-4800 fairly easy.I've messing with vSOC, VDDG, PCIe Gen, disable enable onboard device, trade NVMe to SATA, Timing, VRM settings, changing DRAM, reflash the BIOS (Tried BIOS flashback & EZ flash). So far no go.
BIOS is official 1302, didn't really want to downgrade the version, as I see the other didn't have the issue, and for try to make the write up of this G.Skill Neo as a Ryzen kit, using the latest BIOS, software that officially available. ?First I've seen that different board can alter the FCLK speed achieved. ?
Any ideas?
Thanks. ? -
DDR4-3800 is fairly high / top end for Zen2 when running 1:1 (FCLK:UCLK) scenario for best performance (latency) for daily.
You can try to mess with the timing to further improve the overall system latency, you can try to replicate higher DRAM bin settings. Like, try to match the XMP settings of TridentZ Neo 3600 / 3800 c14-16-16.For high frequency I've try like DDR4-4400+ with loosen timing (c18++). But not all MBs, DRAM, or maybe CPUs run that high for daily.
-
Maybe you can look up into the Crosshair VIII Thread, the variable & step / workaround is similar.
07 is Fabric (IF / FCLK) issues, when cold FCLK has CB / CBB you must mess with vSOC, VDDP & lower FCLK clock to compromise within the performance & CB. -
Good score! Do you think there is much left in the tank? BCoz it seems good performer in ambient. ?
-
Whoa... So much tips! Thanks @FireKillerGR & Asus OC Team!
Congratulations for the killer result on D-Day! ?1 silly question from me is, Why must 4095W & 255.5A? Not the usual 4096W & 255.75A, IIRC on the previous Gen settings?!
Any flag will triggered when I put the maxxed out settings like before?
Thanks again.. ?- 1
-
Woah, special 2DIMM Aqua version. ?
-
On 3/20/2020 at 2:07 PM, Leeghoofd said:
A question pops up now the world is cracking under the Corona virus:
Is everybody still able to have access to Liquid Nitrogen ?
My city, Capital city of Jakarta is an epidemic epicenter in here so far. Crisis seems still in it's early stages & increasing, non essential business told to close the office / WFH starting this week. It's planned for the next 2 weeks or more.
Haven't checked my LN2 supplier more than 1 month right now, since they didn't have delivery services for low volume buyers like me. But is expected to be more difficult.- 1
- 1
-
Hello, anyone have guide to setup Windows 7 for X570 + Zen2 (Ryzen 3rd Gen)?
Or kind-hearted enough to share the working Win7 installer ISOs / installation images (like Acronis .tib file) to restore to?
??I have Win7 image that work flawlessly with X370 / X470 MBs + Ryzen 2nd Gen, but isn't working properly in X570 + Zen2.
I can't have any USB working on this new platform. And sometimes it has booting issue. ?I had slipstreaming new USB3 driver to my Win 7 installer ISO but didn't work. And I heard this method already doesn't work anymore?!
And we must use / install another (modded?) USB3 driver after Win 7 installation? How? Can I get the stuff?Thanks for helps.. ☺️?
-
For the widest compatibility (Athlon GE up to 3950X) these days, I'd go with ROG Crosshair VII Hero. X470. Nice / decent board for benching AM4 platform or even just daily setups.
It has BCLK OC for sure but lacks of dual BIOS & DISPLAY OUT though IIRC.
Or You can go with Crosshair VI Hero for lower price. IDK though if we can find it in new condition & covered by warranty. -
2 hours ago, Bilko said:
Hey mate, Vcore limit is 1.7v, no working GTL for current BIOS.
Ah, the usual GBT voltage limit for the AM4 board. Wanna try some APUs benching on the GBT board soon, maybe the ITX board.
Thanks mate for your info. ?
-
Great score. Is any voltage limit on this board? And is any GTL working for this board? Can you share it? Thanks
-
Nice score! Is there any voltage limit in this board? And is there tuning utility in the windows? And did you observe power consumed when graphic test running at this setting?
-
On 11/2/2019 at 4:40 PM, safedisk said:
C8I AGESA 1.0.0.4 PATCH B 0015 BIOS
only change LN2 enable, retry button will keep last value.
if set at 101MHz. press retry button will keep 101MHz, won’t return to 100MHz and then go up to 101MHz.
What version is new? 0017 or 0015?
Thanks. -
On 6/26/2018 at 3:40 AM, ajc9988 said:
3) Put a clean Win 10 image on a USB. Then only replace the install.wim on the USB with the Install.wim modified from Win 7. This will install windows 7 without an issue,
So you can install Win7 with Win10 USB by change the install.wim, eh?
Or we use 2 flash drive simultaneously to install the Win7? 1 is Win10 & the another 1 flash drive containing Win7? -
4 hours ago, GtiJason said:
Not sure if this is considered native, but I added HT to 0094 from AlexRo. Not very recent tho so doubt KF or KS works
"Added HT to 0094", How?
Anyway thank you for this '0094 / creative.rom' modded to support HT. I'll try it. ?
-
On 10/25/2019 at 12:01 PM, FireKillerGR said:
Hi guys,
thought to share the new bios for M11A that helps getting higher CL to work for memory frequency.
Before, with CL24 max limitation was 4933 on air.
New bios with the same stick and cpu can do 5300MHz easily.
EnjoySo this BIOS is newer than Dancop's A2 Mem OC BIOS (0021) ??
Naming digits somewhat confusing, hahah ?Does this BIOS support the 9900KS? And any BIOS like This for the little GENE?
Thanks. ?
-
Hello, I want to ask quick question.
Is there any 'native' modded Maximus 9 Apex BIOS that can support Coffee Lake with HT working?!
*Not that Maximus X Apex BIOS ported to the IX Apex
Thanks..
-
Finally a new milestone, congratulations you set the bar so high! xD
-
-
Go..go..go..! Nearly there man..!
-
2 hours ago, FireKillerGR said:
this (M10A.cap) is the 0001 bios with XP (1704 style)
attached as well.
Is it practically the same Within M10A.CAP & 1801 Mod.CAP?
Or M10A.CAP = 0001 BIOS with XP. Which is high volt w/o LN2 mode & IGP support?
And 1801 Mod.CAP is = 1803 BIOS with XP Support?Thanks.
-
Hello,
I wanna ask a simple question,
Is there any workaround / method to know or list which HWBot competition have been entered by the user since they have a HWBot account?My method so far is by clicking 1 by 1 the competition archive link you may remember entering.
If there is no any better method than this, can we add this to the future feature of HWBot? That's will be great feature I think. ?Thanks for the answer. ?
-
6 minutes ago, zeropluszero said:
it cant be set higher than dx9
Ah yes, Okay.
So I'm not too noob. -
Hello everyone..!
I just want to ask simple & noob question,Is there any workaround to make LOD tweaks working on AMD card for DX10 and higher?
Have spent hours to search & trying.
Thank you all..!
ROG Crosshair VIII Hero / FORMULA / IMPACT / DARK HERO / EXTREME LN2 OC Guide
in Ryzen | Bristol Ridge AM4
Posted · Edited by IvanCupa
Have try 3900X, 3950X & 3500X. The 3500X turned out have the best FCLK capability based on MSI. (Just need 1.1v for 1900 FCLK there), the other two need around 1.15v+. ?
G.Skill Neo 3800c14 1.5v kit BDie.
The setting is just to attempt / replicate XMP setting with 1900 FCLK up & running, all auto. Then, passed the memtest, just like I pass with MSI Board.
At C8I vSOC Auto is at 1.1v when running at 1900 FCLK. But I've try up to 1.35v vSOC & messing with VDDG, like I said before.
Just have the workaround few days ago, Load XMP (DOCP) -> set FCLK 1900 -> minimize BCLK 1 step. BOOT, enter OS. Set back the BCLK to 100MHz.
All voltage are auto with this setting, vDIMM is 1.5v set by XMP. Memtest passed.
With another way, I can't POST / enter the OS like previously.
It's works somehow, but must have workaround for this simple requirement & can't just load XMP & set FCLK 1900, that passed flawlessly in the other board, on this WR maker board just bumped me out. ??
Or just the silicon angel not at my side this time.. LoL
Thanks for the response. ?