-
Posts
1708 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GtiJason
-
-
^sent and delivered, enjoy it man.
Kingpin F1 Dark arrived safely, I think I payed for it Wednesday night and had it by Saturday early afternoon, so less than 3 days from payment to delivered, and that's from Cali to Ill-waukee, WI
This guy knows what's up...10/10, Will happily purchase from him again
egroeG sknahT
-
Haha thanks guys, I was in and out of the house all day so needless to say there was going to be moisture. Under all that tape is armaflex 1/4", blue shop towels and you guessed it.......more tape. Too bad I can't find more time to play with all them toys and yesterday when I did, I had problems with 0x0101 several times and 124 once. This never happens on this cpu, maybe it needs a delid like the rest of my chips
-
-
killer mems!
-
Ga Ga Ga........ Giga What! Nice collection. Mine consists of Haswell/Devils Canyon mostly, but started Skylake too.
MSI Z87+97 X Powah, Z97 Gaming 7, Z87 M-Atx Gaming
ASUS Z87 + Z97 Imp....act
GIGABYTE Z97 SOC Flizorce, Z97X Sli
AsRock (3) Z97 OC Formulators
Yeah.....I know......I HAVE A PROBLEM/// step one completed 11 to go í ½í¸
-
Killer efficiency, especially on dice and a 650w psu. Who's Nat'l Semi?
-
Nice run, ultra strong mems.....but it looks like Dad pulled out a trap card!
-
Uh.......WOW. Those mems are boss
-
Ran some 5G as well, all dry ice. P1.70 BIOS working well for me.
These are mfr not afr ic right, either way fantastic efficiancy and strong mems
-
KP F1 Dark paid for.....Please check PayPal and PM
TY for the deal!
-
Thank for the share.
I used this to reseal my CPU
http://www.walmart.com/ip/Permatex-Black-Silicone-Adhesive-Sealant/16879902
But, I wasn't satisfied with the TIM job (big temp disparity between cores), so I cut it off & redid the TIM. Was easier than cutting through stock Intel adhesive.
Just remember to give the sealant enough time to dry (24 hrs), for the first few hours, its easy to disorient the IHS because the sealant hasn't dried.
I have found that this version works a little better for me, it's made for high temps and creates a good "seal" aka gasket without the need to be too thick. I've had no problems removing it to refresh my tim. I install the sealant, install the lid, let it sit for an hour and then clamp it down in an unused motherboard to cure for 24 hours. Just like it says in the directions
http://www.walmart.com/ip/Permatex-Ultra-Black-Hi-Temp-RTV-Silicone-Gasket-Maker/16777009
-
I've been wondering if my mobile device had a problem, but no chatbox on the rig as well. It has been very helpful in several ways for me. I've never noticed any spam, what do you mean?
GIVE US CHATBOX BACK......please
-
For the 0ohm, just short it
Is the 0ohm the last red box on the right of his 980ti pic? Just checking to make sure I understand this correctly for future use of knowledge
-
devlos over at overclockers.com is looking to get rid of his ss. I pm'd him a link to here.
You can see pics and stuff in this thread.
http://www.overclockers.com/forums/s...h+phase+change
I am unable to see his thread since classifieds over there require 30 quality posts and I have like 2
-
Nope, just win 7 home premium I tweaked. I am having problems installing xp by usb and xp reinstallation cd. Oc formula says analyzing hardware then goes to setup but just stays there. I broke my last xp os install. I also have .gho file from Perica and am unable to install on new ssd. Wasted six hours yesterday trying with rufus, yumi, etc
-
I am missing one on gpu as well, they are surface mount ceramic capacitors and not all DMM's measure capacitance. Pretty sure they are made by TDK but even ones similar in size can vary. easy to replace with a good heatgun with a pencil tip or iron w a tiny chisel tip
-
is that a wurth impact holding up an asus impact?
-
Little devil bench table is decent but tbh if I was doing it again from scratch I'd spend the cash on the cold stuff and just use Arma to sit the board on.
That's currently what I'm doing, blue shop towels, then armaflex sitting on a nice thick sheet of foamboard. Makes it easy to move around or pick up as well as minimizing flex from the weight of the EK Inflection and Triple point pots and/or the gpu
-
Looking for Dimastech/Little Devil table used or suggestions on where to purchase new in the US. I hear Dimastech is a gamble, and if true would prefer to avoid supporting a company like that. Something like the Easy V3 is the right size/style
Also looking for a Phase Change unit new or used as well, If I can't find a nice used one the only place I know of is "Under the Ice" which is reputable and does quality work. Only thing is I would probably be restricted to SS since with shipping his units are close to $1000.00 and I would prefer not spending too much since I can buy a lot of lin for that kind of dough. I also would love the option to do lazy testing/binning and having the option to cool cpu + mems or cpu + gpu would be fantastic after a long day at work
Any advice or suggestions are greatly appreciated if you have experience with either of these as I know finding a nice used Phase is about as rare as finding that Lion that is supposed to be chillin' in the hood of my city.....Milwaukee WI
-
Attached is pic of error I'm receiving, maybe because it's my first ln2 submission
-
You're a beast Luumi, 6633 mhz...so insane. Maybe it's time to delid my L318 4770k
-
Yes,1.95 on MM,will trynhigher for sure pnce i have backup kit
MM...? is that short for MaxxMem
-
Damn Luumi, nice run. I heard you had 75L to burn the other day so I've been keeping an eye on your subs. Did not expect to see something this great though, good job boss!
-
;413781']yes is form quad channel kit but ' date=' me i have only 2 stik's (yes is from RMA)
i am an entuziastic , i don't have pot's for ram or LN2 ,[/quote']
Cool, let me know what shipping would be. I think expensive though, it was when I bought from Alex@Ro
Having problem with the Xtu new version
in Benchmark software
Posted
That's exactly what was happening to me