-
Posts
1708 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GtiJason
-
-
Whoa, I haven't seen this one 2900+ @ c6 and uber tight tertiaries...I like it
-
Copy, Read and Write are really just average, but that 25.4 latency is obscene
-
The 4266 kit looks like a nice kit
I got lucky, ordered a kit for a friend overseas and he convinced me to get one as well. He only had one stick capable of 12-19 so had to run 12-20. I was going to sell them but finally found a couple hours to give them a second look and now not so sure. I still have 2 kits 3733 TridentZ to give a thorough try and just got my 3600 White Dragons so something has to go as the winter months are slow for home remodeling projects. Aka my only source of income
-
Here's mine, set 1.850v BIOS is 1.900v actual
on a happier note, both my TridentZ sticks are stable at 4000c12-19-28-1 at 1.880v actual
-
When I got my 4790k vietnam it would run 5000mhz 4/8 at 1.32v with uber tight mems. After the first run cold it now needs 1.365v, not sure cold caused this but it seems to me that as soon as you need to clean the gold contacts on cpu it needs moar volts
-
XTU is all about efficiancy of memory and tight timings, voltage used for core speed, cooling efficiantcy or lack thereof etc. You must be thermal throttling at 99 - 100C so scores will be similar since its running at lower speed, using close to 1.5v to run 4900mhz is not great and the memory timings have serious issues for good xtu or other memory centric tests such as GeekBench 3 and 32m Super Pi. You need to be using PSC based or Samsung based ic'sthat can run tWCL=6 and Dram ref cycle at 112 or less, frankly your secondary and tertiary timings are bad. You should be seeing a lot more 4's and 5's and you only have like two of them that low. You must be using hynix based ic ram and that is only good for max frequency and make sure the dimms are not single sided. Other ic options that can run tight timings are Elpida bdbg, bbse and hyper. Find a way to be effeciant and you will score the same using far less cpu speeds
-
With a cpu as good as this you should have stayed in ambient leagues and dominate. Let's hope it scales well while frozen as 4790k is usually not as good as 4770k
-
I shouldn't need anywhere near those Sytem agent & IO volts I don't think, I am only using +0.125 for SA and AUTO for IOD/IOA, and 2860 was running fine
I'll add more if I need though. I'll go and try all those settings shortly.
I just quickly chose the nick shih 2933 preset and tightened mostly just the main timings. I set 2.25v cause I knew it would boot and left the rest auto. Those mems can run those timings at lower volts plus setting manually the sa and io volts does help. The pic was supposed to give you a starting point for timings as the rest varies. Oh and here on Earth, we say thank you
-
Still testing some stuff, I know this is not superpi 32m, but I figured I'd take a screenshot of my timings and ask some questions.
vdimm @ 2.15v, how much headroom do I have? I really want to see if I can get 2933 9-13-13 to run or something like that.
I am unsure if I need to loosen RTL to get 2933 to work, I don't really know much about RTL and stuff like that.
Also for some reason TWR is displaying as 18, but in BIOS I'm fairly sure I have it set to 10. (I'll go fiddle with this and see what's up)
Instead of trying something like 9-13-13-17, try 9-12-12 but you may have to raise tRAS up to 21-24 and or tREFI as high as 128. Actually here are perfect settings to start with and tighten from here. Rtl's probably wont get to 41-42 unless u have 2 dimm board or some cold aka -35C
-
Umm RTL's 35 - 36 and 8-8-6 tertiaries at that speed is just nucking futs, wow all hail the 32m king
- 1
-
Where on earth did ya get that ram kit? Wow!
What's the default xmp? 2666 c10?
Well the 2666c10 Dom Platts are the best ddr3 money can buy, add in a 2 dimm mem monster board and you've got a recipe for success
-
http://www.servethehome.com/intel-xeon-e5-2670-v1-prices-still-plummeting/
You can pick one up right now on Ebay for around $130.00, just in the last 10 days prices have dropped close to $100. Just keep in mind there are two major stepping versions to look for:
SR0H8 is C1 stepping. VT-x is supported but VT-d is supposedly not supported
SR0KX is the C2 stepping with the VT-d fix which may be important for virtualization pass-through
-
Oh yeah, and for the f1 dark I still haven't had a chance to use it
-
Do you like that EK pot more than that F1 pot?
I hated the ek block at first because of how it mounts. I killed my favorite z97 oc formula (got 3) because pot pushed cpu so hard it actually crushed the pins and on that new 4690k that is so nice I got from intel tuning plan. First time going cold it literaly cracked the ihs in a C shape
-
Vcore was just that, 1.540 volts at 6100 mhz, 1.45 cache volts and 2.407 vccin. I am certanly hoping to shoot for more but this cpu is very finicky about the 3 voltages above and the imc has troubles with psc and samsung ic. The TridentX kit used is fully capable of 2933c9 12 12 21 112 with tCWL at6 and refi at 30000. Using psc mg's capable of 2750+ mhz at 6 10 6 24 68 and cas write latency of 6 I think 2600 c7 11 7 27 was as tight as I could go
-
I will be trying for sure, believe that but this cpu's imc is terrible, I would never run these settings when collecting awesome ram is what I do. Unfortunately cpu disagrees and likes to push my buttons but I'll be pushin' back
-
Also at the top left where it says "modify your search query" takes you into search, ok so good so far.......but
now I can no longer search by only hardware since you are forced to pick one individual benchmark. This pisses me off greatly!
-
When should we expect it to be posted? Any chance I can get this and my Thermal Grizzly shipped together?
This would make me a happy man, I've been reusing my TG for 2 weeks on Z97 and did all 7 delid's using vice method and do not feel like risking my only 6700k
-
T Grizz, twice recycled....Third time's a charm!
-
l0ud_sil3nc3 indeed. rolflol
SS
Just use search feature, this will get you started and you can modify it based on benchmark.
-
Shout it out LOUD!!
Nicely done- Remember a pig is a Cop!!
Or better yet a Terminator, like Arnold Schwarzanegger
Try to play me out like, as if my name was Sega
Looks like I should just stop looking for one of these i3's in the US
Score kinda seems unbeatable....Good job bud!
-
Sorry bass is same kit
I was so hoping they had released new afr retails too
-
I have tried 3 different flash drives with both fat32 and ntfs, so it must have something to do with the file naming with xp.iso being tied to nlite or issues with the ssd but I did try all of the sata ports and even tried different storage and boot settings in the bios. Thanks much for the help in pointing me in the right direction
-
Anyone else get this error?
Calling all USA Overclockers! Map your location!
in Announce event and group sessions
Posted
Nice, I'm on the map