basco
-
Posts
281 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Blogs
Posts posted by basco
-
-
the geil should be hynix or?
-
did ya use older version of benchmark like 1.01 ?
or in pic i see 1.0
-
i hope not !
in 3dmark 06 ranking first 5 only 2 use real 6950
same shit like gtx 260 192\216-spend days reporting people-and i dont like to do that
-
the newer versions since i think 1.69 are taking so long.
i take out sensor+spd+update and get the quickie back
-
you should look under sensor tab of gpu-z during load what boost you get.
just load it with the "?" on gpu-z and change to sensor tab.
the boost on first page of gpu-z is normally not the final boost.
i start with core clock and leave the rest like power target+++ everything else stock.
then run something like heaven with gpu-z in background and compare max boost clock on sensor tab.
if its same boost as before then you will not need to put power or temp limit higher.
for example mine says on 1st page boost 1241mhz but in sensor tab 1366mhz.
so if i push core +150mhz i am at 1510 boost
-
they normally all top out around 1450 to 1550 mhz with stock volts.
use gpu-z and look how high your boost goes under load.
-
if you can boot in windows use cpu-z.
-
newest bios ? is it ddr2 version?
best site for dfi bios:
-
i could go higher on pci-e on ati gpu´s then on nvidia ones.
- 1
-
no off against ericwei:
but is this the prob we are talking about? its nearly impossible to look trough the scores-takes ages
why no mandatory screenshots for xtu
-
The stock clocks are 1.66 Ghz and 1.73 Ghz with turbo.
http://videocardz.com/59882/nvidia-geforce-gtx-1080-3dmark-overclocking-performance
-
-
http://www.xtremesystems.org/forums/attachment.php?attachmentid=94555&d=1234296145
only pic i found but if you can tell what is your volt chip others could help better then me.
i think its ncp5388 ?? maybe
-
did you try gamerhud from gigabyte:
http://www.gigabyte.at/MicroSite/40/tech_20080718_gamerhud.htm
and i looked up but could not find info on volt chip? can you tell us?
-
http://www.rom.by/files/vt1165mfqx.pdf
maybe this helps too??
http://forum.hwbot.org/showthread.php?t=93981
or maybe ask "der8auer"
-
it should look like this:
dont put the check mark on group tuning
sorry i think the tool is only for x79
-
i did not find it but i think there was some cpu tool from shamino at kingpincooling.
what about turboVcore ? cant you boot up with 2 cores and lower mhz and then push just the one specific core?
-
i just found a shammy280gtx coldslowbios i saved a long time ago.
had a quick look in nibitor and seems ok with 2d+3d volts on full 1,1875volt from asus.
be careful never flashed this bios myself.
-
i loved cpu tweaker
-
-
reference clock is for your motherboard.
so not every different cpu will get you points with same mb.
-
health to both of you and your families!
-
i acn see in your screenshots from 560 that your card uses elpida memory if that is correct?
all other twin frozr II should have samsung mem. maybe thats the prob.
i flashed this bios on my twinfrozr II no problems
-
what about gpu shark or gpu caps viewer?
HD 6950-> 6970
in HWBOT OC-Crime Center
Posted
i post scores in same fashion then superpatodonaldo.
i even write that i unlocked my 290 to 290x and for sure i put it in 290x category. this is normal behavior for me.
and mr.websmile you say its the old way and that worked for years.
i think this category is best example thats not working here.