-
Posts
223 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Doc.Brown
-
-
-
Homemade one ;)
-
18 hours ago, chispy said:
Efficiency is very good Doc.Brown , nicely done.
Thanks Chispy :)
-
and solid potato,thanks ;)
-
Well it's not my memory profile for 10k4 GB3 score on the 4772C14 screen,for me it's like George says an bandwidth story for this memory test.Perhaps it could be interesting to only compare GB3 and Aida memory test by 200mhz steps to see the impact of the bandwidth on both and if it scale the same ... don't know
- 1
-
- 3
- 1
-
16 hours ago, websmile said:
Can it do 4266c12? Or 4133?
4133 is ok but no boot at 4200/4266 with different secondary and tertiary
- 1
-
On 12/25/2018 at 8:58 PM, Alex@ro said:
The new Geekbench standard for B-die DDR4-4860 14-14-14-28-2T all air . Voltage tolerance is needed for sticks, DDR4-4800+ requires 2.00V on this particular set. For comparison, at same voltage and temperature the kit does DDR4-4260 12-12-12 but as always YMMV
When dealing with 7F code trcd is too tight, on my setup 1T is good for 4600, over 2T is needed. Use maximus tweak1, tcwl 14 twrrd_sg 26 twrrd_dg 20, rest similar to standard 4000C12 more or less personal tweaking. When air or water use manual system agent 1.40-1.50 or more depending on imc, auto is 1.70 for 4800 and you might not feel safe
Forgot to post mine with random 4133 retail kit ?
- 1
-
6 hours ago, antome said:
have you tried the PS2 splitter cable? If it works, can you tell me where you got it? I tried with another green and purple ps2 splitter cable but always sees either keyboard or mouse
edit:
Same for me so I took a PCIE 1x card with 4 USB ... hope to have 0057 XP bios ready one day ^^
-
On 1/10/2019 at 11:34 AM, Alex@ro said:
You can try to lower RTL initial value as low as you can meaning the board will train most of the times the tightest RTL's possibl.e Then change Offset from 21 21 try to go lower . Manual setting usually will give you 55, tightening RTL at high freq is not easy and also not very rewarding, it looks like the higher frequency you go the impact of RTL's and tertiary is lower compared to let's say 4000.
Yep you're right I did this method that works well for RTL but there's no gain on the score,that's why I asked you :) Thanks for your answer.
- 1
-
14 hours ago, boblemagnifique said:
Hey guys
I will try to repair a Aopen i975xa-ydg but i've a issue on the cpu probe (locked at 125° / 1F).
Impossible to boot windows or installation (i've tested with other mb for it), i've testing others bios (1.03G/1.10) and the Tcore mod but it's the same...
If you've a solution... (i've research old threads on XS but can find anything for that, just explain the issue). it's so old, my memories is bad
Thank
Bob
Put a cooler on the CPU n00bish
-
Error message comes after installation not before during checking,I 'll test or wait for PS2 Y it will be more simple :D
@Alex@ro Have you got any improvement by setting RTL/IO manually,I tried it yesterday to test my A1 Bdie on GeekBench3 but have any score improvement.In Auto RTL was at 65 tight them to 57/59(max boot) but,that I don't understand, IO doesn't move with RTL,in Auto they are at 14/15 value and also for 57/59 RTL,fix them in manual there's no boot.
Is there a particular technique to have tight IO ?
For now I have this and would like to improve with manual RTL/IO:
- 1
- 2
-
Not sure they already exist,even Fernando's modded one with DP install doesn't work cause there's signature issue...
Your PS/2 Y is for black PS/2,you need Y for green/violet PS/2 for both works as I understood by reading some comments before buying mine ;)
-
Yes it works also for me but no USB,I tested many drivers but none works ... so I purchased an USB card on PCIE and also one PS/2 Y
-
Is there compatible USB driver for XP(32 and 64),I've tried all previous Asmedia that I have but none works with bios 54,thanks
-
2 hours ago, electron libre said:
if I have the world record without cheating !!
-
9 hours ago, KaRtA said:
Does Seasonic sponsor every European XOCer?
Do you mean like Gigabyte and every Australian XOCaroo ?
- 1
-
SOC Force sold on other support
-
-
13 hours ago, Fasttrack said:
A simple question please - with all respect.
Why don't you accept PayPal ?
PayPal is a secure way of transferring funds - safe for the seller and safe for the buyer in case something goes wrong.
I would consider buying your X58 board if you are willing to re-consider.
Thank you.
I simply don't have Paypal account,it's just for that reason ;)
- 1
- 1
-
-
Last price cut
-
Price cut ^^
-
15 hours ago, Noxinite said:
X58 is silly expensive.
Good X58 boards are rare nowadays ?
- 1
Doc.Brown - GeForce GTX 460 (256bit) - 591839 marks Aquamark
in Result Discussions
Posted
Thanks Ale :)