[FS] 4770K 6.3 SuperPi // 6.1 Wprime

Wizerty · July 28, 2014

Hi,

I already bin around 60 CPU. I have 3 cpu left, all clocking the same. I probably keep 2 pieces ( one for backup).

Test on MpowerMax :

4.8Ghz on air (30°c ambiant) on wprime @1.3Ghz with 4c/8t.

6.3+ on superpi @1.78v (don't test with more, nor less)

6.1+ on Wprime @1.62v (don't test with more, nor less)

All have CB @-130 (-125/-135)

First, what's the price for this kind of piece ?

Box + rad + warranty

Price : 430e without shipping cost

Thanks,

Wizerty

Edited September 4, 2014 by Wizerty

nedernakker · July 28, 2014

superpi 1M or 32M?

Wprime 32 or 1024?

raules009 · July 28, 2014

interested in the cpu

raules009 · July 28, 2014

Hi,

I already bin around 60 CPU. I have 3 cpu left, all clocking the same. I probably keep 2 pieces ( one for backup).

Test on MpowerMax :

4.8Ghz on air (30°c ambiant) on wprime @1.3Ghz with 4c/8t.

6.3+ on superpi @1.78v (don't test with more, nor less)

6.1+ on Wprime @1.62v (don't test with more, nor less)

All have CB @-130 (-125/-135)

First, what's the price for this kind of piece ?

Box + rad + warranty

Thanks,

Wizerty

I offer € 430

dx4picco · July 28, 2014

not enough for thus piece I think

Wizerty · July 29, 2014

superpi 1M or 32M?

Wprime 32 or 1024?

I only made fast test (1M pi and 32M Wprime).

Honestly, my LN2 "dealer" is on vacation for 6week.

I only have only 60l, and I have to :

- Make 2 reviews with motherboard on cold,

- Bin 4 G3258 on cold

- Bin 7 new 4770K on cold

- Run R9 290x for MAO (03 and ungine)

- Run 32M superPi for MOA

So I don't loose time, I only bin CPU with 4c/8t at low voltage with fast benchmark -> 6.1+

and superPi 1M with higher voltage 1.78v on any core.

If you need more detail :

L317B ->

6.1+ wp32M & 6.3+ superpi 1M (5loop 1M@6.4Ghz)

All core are the same -> 6.3+ 1M on C0, C1, C2, C3.

L315B ->

6.1+ wp32M & 6.3+ superpi 1M (6loop 1M@6.4Ghz)

All core are the same -> 6.3+ 1M on C0, C1, C2, C3 but run easier at low T° with 2cores... I don't understand why... On all my old CPU, when you disable core, CB is higher ( -130 instead of -134 for example), but on this on, I can run lower in T° with less cores. But I made only 1 shoot so we have to test it again.

L312B ->

6.1+ wp32M & 6.3+ superpi 1M ( 8loop 1M@6.4Ghz)

It's the last I have test, so I spend more time with this one. Further test I made on this one (L312):

1.82v instead of 1.78 -> 6.4GHz superPi 1M OK

SuperPi 32M @6.3Ghz ok run 2 times, 1time "not exact in round" at the half due to T° -> -120°C instead of -130... I was talking on facebook and 1 time OK between -130 and -125°C

But on this CPU, core3 is not as good as core 4. I can run 32M @6.3 nor 1M @6.4 on core 3, but I can on core4

I swear I can't add nothing else... you know everything. I made it fast, really, need to save as much LN2 as possible.

Moreover, I usually use my homemade CPU pot (heavy), but It requires too much LN2 to decrease T°... To save LN2, I used EK CPU pot for binding cpu. He is really light compare to mine.

-----

If you guys, can give me a price, even if you are not interested, I need to know the price I have to add in the first page

Thank you

der8auer · July 29, 2014

You have to ask for a price according to the marketplace rules.

Wizerty · July 29, 2014

Damn, rules are everywhere !!! I look at It this afternoon

Wizerty · July 29, 2014

Already fix some "trouble", still need to fix the ones below, I did it when I go home after work :

Pictures of the Items are required to start a topic. In addition you have to handwrite your HWBOT username and date on a piece of paper and place it next to the items. The date on the

Post information about the estimated shipping costs - especially for international shipping.

Post information about payment details. E.g.: PayPal or international bank transfer accepted.

----

Price 500e, if it's to expensive or not enough pls let me know. Picture incoming

dx4picco · July 29, 2014

think its good price bro

nedernakker · July 29, 2014

Thank you for the extra info, I was not meaning to insult you, it's just that it's more clear to everyone what they are buying.

Too bad that you couldn't test more due to the LN2 supply.. Personally I think it's quite a risk for 500 based on this information.

For the information, is the 1.78V real voltage or bios voltage?

Wizerty · July 29, 2014

Thank you for the extra info, I was not meaning to insult you, it's just that it's more clear to everyone what they are buying.

Too bad that you couldn't test more due to the LN2 supply.. Personally I think it's quite a risk for 500 based on this information.

For the information, is the 1.78V real voltage or bios voltage?

All is real. Bios is really different with cold 1.7 bios -> 1.78 real

Further test on L315 for french guys who want to buy it, but I put information there too :

1.28v real wprime32M @4.9 watercooling (no ice, no ln2...ambiante T° above 20°C..) -> 70°C

1.4v Wprime32M @5GHZ (same condition) -> 80°C

5G superpi 1M @1.32v

5.1G superpi 1M @ 1.4

Mpower (not Mpower max, the normal), with all set in auto except : Vccin 2v / and Vcore (this information next to frequency). VRM, drop, switch frequency... auto

It's the "hotest" CPU I have tested so far (6-7°c more on air) and lowest VID 0.96 on M6E, 0.98 on mpower.

I will test it again on cold, it's not possible it can't go higher...

raules009 · July 30, 2014

All is real. Bios is really different with cold 1.7 bios -> 1.78 real

Further test on L315 for french guys who want to buy it, but I put information there too :

1.28v real wprime32M @4.9 watercooling (no ice, no ln2...ambiante T° above 20°C..) -> 70°C

1.4v Wprime32M @5GHZ (same condition) -> 80°C

5G superpi 1M @1.32v

5.1G superpi 1M @ 1.4

Mpower (not Mpower max, the normal), with all set in auto except : Vccin 2v / and Vcore (this information next to frequency). VRM, drop, switch frequency... auto

It's the "hotest" CPU I have tested so far (6-7°c more on air) and lowest VID 0.96 on M6E, 0.98 on mpower.

I will test it again on cold, it's not possible it can't go higher...

how much shipped to Italy?

accept paypal?

with which you send?

Wizerty · July 30, 2014

how much shipped to Italy?
accept paypal?

with which you send?

Probably 15-20e for EU

Paypal yes, but you take fees

I send with "La poste", it's the france mail delivery. I already send many CPU to italy, it take 2or3 day.

The 1st CPU is normaly sold in France. I wait for confirmation before 1Pm. If still available, I let you know

Wizerty · September 3, 2014

4790K sell to BarboneNet

CPU info :

Test on Mpower (water cooling) Mpower MAx ( LN2)

Watercooling is the one you can see on the film. No ice, no chiler... ambiant T° 24°C (approximately) . All CPU test in the same condition.

LN2 test are made with EK cpu pot. I used it for bining purpose, light -> faster to cold down and to dry.

ALL IS ON XP, never test seven, I need XP for AOOC.

Voltage is bios setting and (voltmeter setting), for exemple 1.6v ( 1.66v)

ALL IS with 4 core /8 thread , even superPi.

I only used ratio ( bclk is always 100). So If I say 6.3+ it means 6.3 is easy, 6.4 didn't pass. If I say 6.3, 6.3 pass but you need to be close to CB T°, so probably hard to push 50Mhz more.

**********L418C134 05xx

WC : Wprime 32M 5Ghz 1.31v (1.32v)

LN2 : super Pi1M 6.4GHz 1.65v (1.72v) // Vccin2.2

LN2 : Wprime32M 6.2GHz 1.6v (1.66v) // Vccin 2.2

Cache : superpi 1M 5.8GHz 1.45v (1.5v)

Vid : forgot to check

CB/CBB : -130.

Good cpu, easy to bench. Didn't test with lower Vccin. I tried 2.4v one time, but no imporvement ( step is too big 6.4 ok , 6.5 not ok)

DEAL : 400e including shipping

NonsoloPizza Parma

hi i'm BarboneNet

Jean-Michel Tisserand

11:52

Jean-Michel Tisserand

hi, how are you bro ?

for the CPU, I can tell you tonight when I can ship it

I just need to test my golden (air) cpu

NonsoloPizza Parma