Have a GPUz showing spec’s along with a AM3 run trying to go slow which would be a first place MMX 400 PCI but the DDR making a big dif so where do I put it? So far having problem with the AM3 wrapper.

Could you please add the following VGAs

 

Nvidia GeForce2 MX400 64MB DDR 64bit PCI, GPUz screen shot in my first post

 

SDR 64bit PCI has subs from both the DDR & SDR versions so can put subs there but based on the AGP versions doesn’t seem right.

 

 

Ati Rage 128 Pro PCI

 

Can’t find anything that points to the specs being different than the AGP version, haven’t tested the card yet only board I have setup with a PCI slot was running AM3 when I got the card out of the mail box.

 

 

Ati FirePro V5700

http://www.techpowerup.com/gpudb/858/firepro-v5700.html

 

Picked up what I thought was a Ati FirePro V3750, card had been flashed to a more gamer friendly BIOS should have figured the larger amount of RAM meant a different FirePro but didn’t put it together at the time.

 

Thanks

http://hwbot.org/hardware/videocard/geforce2_mx400_64mb_ddr_64bit_pci/

http://hwbot.org/hardware/videocard/firepro_v5700/

 

Please post a picture of that Rage card especial used core. GPU-Z and everest would be also nice.

Thanks

 

HS attached with epoxy at this point don’t want to risk killing the card, do have GPUz and Everest screen shot. Will post some Images of the card once I figure out my wife’s camera.

Front and back of the Rage card.

 

Sorry, closeup challenged

Thx, this seems to be really a rare one. I just knew about Rage GL PCI. Will add later.

@ ligmet

I’ll give it try.

 

@ Strunknbold

Seller had the card listed as a Rage XL PCI so was a little disappointed when I opened the box.

http://hwbot.org/hardware/videocard/rage_128_pro_pci/

Thank You!

Picked up a Rage XL PCI 8M video card and noticed that the existing category is for the integrated flavor although there is a mix in the subs so wondering if there is going to be a separation. The card I have is showing 113/83 default clocks.

Separated it:

http://hwbot.org/hardware/videocard/rage_xl_pci/

http://hwbot.org/hardware/videocard/rage_xl_pci_integrated/

Thank You

Could you please add, have this in hand but haven't setup the platform yet so no CPUz SS, getting ready for 2016.

 

http://www.cpu-world.com/CPUs/Bulldozer/AMD-Opteron%203250%20EE%20-%20OS3250HOW4MGU.html

http://hwbot.org/hardware/processor/opteron_3250_he/

Thanks

Would you please add this CPU.

 

Intel Celeron 445 - HH80556KH036512

 

Thank You!

Intel Celeron 445 @ HWBOT

 

Very special one. Nice!

Picked up a motherboard off Ebay thinking I was getting a K8N Neo4 Platinum, not knowing the front panel pinout downloaded the manual and realized it wasn’t the board I thought. Looking close at the name sticker discovered it was loose and a portion had folded under and actually stated K8N Neo4 Platinum/SLI with a model # MS-7100-020 under the sticker. Nothing at MSI but did find that the manual for the MSI K8N SLI Platinum did mentioned the board so sub’d there. Don’t know if the board needs it own category but figured I’d mention it just in case.

The thing is, how does it validate? MS-7100 or something else?

CPUz shows it as a 7100 only, been busy missed the reply, sorry.

 

Thought I picked up a Athlon II X4 640 (Zosma), got this instead so could you please add it.

That is a Zosma. It's being misidentified by CPUz.

 

Access denied

Edited March 5, 20178 yr by Mr.Scott

Expected Zosma in CPUz, should of checked existing subs before I started typing!

CPU-Z has its problems, this is not very user friendly. Probably we cannot do much about that.

CPU-Z has its problems, this is not very user friendly. Probably we cannot do much about that.

 

No problem.

 

Been running through some RAM kits that are in my closet and after looking through the DDR2 list on the Bot didn't see a listing for these.

 

https://www.newegg.com/Product/Product.aspx?Item=N82E16820227169

 

I f you would add, would be greatly appriecated, thanks.

Myself cant add this, created internal ticket.