sailtovictory Posted January 19, 2016 Share Posted January 19, 2016 The use of E7984IMS.B5T to overclocking, 101 were unable to start Make sure you clear the cmos before you attempt overclocking. I also noticed that whenever my overclock failed I had to clear cmos before making any changes. Quote Link to comment Share on other sites More sharing options...
qihei Posted January 19, 2016 Share Posted January 19, 2016 Make sure you clear the cmos before you attempt overclocking. I also noticed that whenever my overclock failed I had to clear cmos before making any changes. Press F6 is clear CMOS? Or motherboard jumper? I am using the mainboard jumper cleared, then overclocking, BLCK101 infinite restart Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 20, 2016 Share Posted January 20, 2016 Press F6 is clear CMOS? Or motherboard jumper?I am using the mainboard jumper cleared, then overclocking, BLCK101 infinite restart Clear CMOS is jumper or onboard button, F6 is to load default settings. To overclock with Non-K BIOS you need to adjust manually BCLK + memory frequency + vCore all at once. Quote Link to comment Share on other sites More sharing options...
qihei Posted January 20, 2016 Share Posted January 20, 2016 Clear CMOS is jumper or onboard button, F6 is to load default settings.To overclock with Non-K BIOS you need to adjust manually BCLK + memory frequency + vCore all at once. Is E7984IMS. B5T has a problem, because no one in the BIOS overclocking succeed Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 22, 2016 Share Posted January 22, 2016 Is E7984IMS. B5T has a problem, because no one in the BIOS overclocking succeed I will try that today and get back to you asap. Quote Link to comment Share on other sites More sharing options...
qihei Posted January 22, 2016 Share Posted January 22, 2016 I will try that today and get back to you asap. thank you In China, has not found that can use the motherboard overclocking success Quote Link to comment Share on other sites More sharing options...
qihei Posted January 26, 2016 Share Posted January 26, 2016 I found that I download B5T unlike your date, I download to date is on December 16 Can send B5T to my mailbox, 2612400@163.com thank you Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 26, 2016 Share Posted January 26, 2016 I found that I download B5T unlike your date, I download to date is on December 16Can send B5T to my mailbox, 2612400@163.com thank you B5T I use is from the link of this thread... Envoyé de mon GT-I9500 en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
qihei Posted January 26, 2016 Share Posted January 26, 2016 B5T I use is from the link of this thread... Envoyé de mon GT-I9500 en utilisant Tapatalk Links to this post, I download after decompression, didn't find there are B5T Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 26, 2016 Share Posted January 26, 2016 Links to this post, I download after decompression, didn't find there are B5T Download again, it has been updated. I checked and B5T is present in the link. Quote Link to comment Share on other sites More sharing options...
qihei Posted January 26, 2016 Share Posted January 26, 2016 (edited) Download again, it has been updated.I checked and B5T is present in the link. To download a compressed package, upgrade B5T, date is not the same as you Edited January 26, 2016 by qihei Quote Link to comment Share on other sites More sharing options...
qihei Posted January 26, 2016 Share Posted January 26, 2016 Or the o.c. failed Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 26, 2016 Share Posted January 26, 2016 To download a compressed package, upgrade B5T, date is not the same as you Not sure why the date isn't the same, anyway here is the file I used to flash the Z170 KRAIT GAMING (uploaded from my USB dongle): http://we.tl/kydog6UPbK Quote Link to comment Share on other sites More sharing options...
qihei Posted January 26, 2016 Share Posted January 26, 2016 Not sure why the date isn't the same, anyway here is the file I used to flash the Z170 KRAIT GAMING (uploaded from my USB dongle): http://we.tl/kydog6UPbK Or the o.c. failed Anyway, thanks for your help Quote Link to comment Share on other sites More sharing options...
qihei Posted January 26, 2016 Share Posted January 26, 2016 Outside the brush A6T DOS, frequency 101 also cannot be started I have already collapsed Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 28, 2016 Share Posted January 28, 2016 Outside the brush A6T DOS, frequency 101 also cannot be startedI have already collapsed I don't know what is your issue, I tested B5T and A6T on Z170 KRAIT GAMING, both worked without any issue, so it must be something you doing... All you have to do is to flash B5T Set up max CPU ratio Set up BCLK Set up RAM frequency Set up CPU vCore accordingly That's all... Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 28, 2016 Share Posted January 28, 2016 (edited) I had the new Z170A GAMING PRO CARBON laying around for some marketing stuff and I figured I'll give it a small shot as well. Maxed the CPU to 4.6GHz and memory at DDR4-3554: FYI, with Loadline Calibration enabled and 1.4v set in BIOS, vCore in idle was 1.377v. vCore under Prime95/OCCT load was 1.381v (+0.004v) all measured with Digital Voltmeter on PWM resistor. It is also on par with the KRAIT GAMING motherboards and the Z170A-G43 Plus I've posted in previous post. Max BCLK Straight Outta BIOS on Z170A GAMING PRO CARBON (no external clockgen on this board): http://valid.x86.fr/5vk7r5 Max BCLK Straight Outta BIOS on Z170A GAMING M5 (with external clockgen): http://valid.x86.fr/cr64m8 Nice and cheap GAMING boards for 24/7 setups. Edited January 28, 2016 by pepinorang Quote Link to comment Share on other sites More sharing options...
qihei Posted January 28, 2016 Share Posted January 28, 2016 I don't know what is your issue, I tested B5T and A6T on Z170 KRAIT GAMING, both worked without any issue, so it must be something you doing... All you have to do is to flash B5T Set up max CPU ratio Set up BCLK Set up RAM frequency Set up CPU vCore accordingly That's all... BCLK various Settings are tried, more than 101 will not be able to start, CPU and RAM LED LED flashing My configuration is: Z170 KRAIT GAMING I3 6100 Sapphire 370 x ADATA 8 g 2400 X1 Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 28, 2016 Share Posted January 28, 2016 BCLK various Settings are tried, more than 101 will not be able to start, CPU and RAM LED LED flashing My configuration is: Z170 KRAIT GAMING I3 6100 Sapphire 370 x ADATA 8 g 2400 X1 You can't ONLY setting bclk with those BIOS you will also have to set up memory frequency and vcore manually! Quote Link to comment Share on other sites More sharing options...
qihei Posted January 28, 2016 Share Posted January 28, 2016 You can't ONLY setting bclk with those BIOS you will also have to set up memory frequency and vcore manually! Memory and CPU frequency voltage is set up Memory and CPU frequency voltage is set up 2133 1.325V Quote Link to comment Share on other sites More sharing options...
qihei Posted January 28, 2016 Share Posted January 28, 2016 I only have a piece of memory, isn't it the reason? Quote Link to comment Share on other sites More sharing options...
qihei Posted January 29, 2016 Share Posted January 29, 2016 I bought a memory, dual channel of overclocking success now Originally a memory cannot be overclocking Quote Link to comment Share on other sites More sharing options...
pepinorang Posted January 29, 2016 Share Posted January 29, 2016 I bought a memory, dual channel of overclocking success nowOriginally a memory cannot be overclocking Interesting... I'll have to test that! Thanks for your feedback anyway and enjoy your clocking! Quote Link to comment Share on other sites More sharing options...
qihei Posted January 29, 2016 Share Posted January 29, 2016 Interesting... I'll have to test that! Thanks for your feedback anyway and enjoy your clocking! I'm sorry, I am happy too early, or a blank screen after restart To change the power supply, graphics card, the problem is still unsolved Try many times, only a success Quote Link to comment Share on other sites More sharing options...
qihei Posted January 29, 2016 Share Posted January 29, 2016 Interesting... I'll have to test that! Thanks for your feedback anyway and enjoy your clocking! Your BIOS Settings, can send a photo I look at it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.