Massman Posted February 23, 2016 Share Posted February 23, 2016 Nuts. Absolutely nuts! Quote Link to comment Share on other sites More sharing options...
flanker Posted February 23, 2016 Share Posted February 23, 2016 But I think, 110-111 MHz BCLK is limit for AHCI in Windows. If I tried 112 MHz system was shutdown. Quote Link to comment Share on other sites More sharing options...
Massman Posted February 23, 2016 Author Share Posted February 23, 2016 I guess ~130 MHz should be fine with IDE mode. That's still almost 5GHz (enough for the 5G challenge). I think you won about 30 seconds with 300MHz, so around 10 minutes flat should be doable with 5GHz? Do you think it's possible to beat K10? http://hwbot.org/submission/2121248_mad222_superpi___32m_phenom_ii_x4_965_be_9min_59sec_844ms Quote Link to comment Share on other sites More sharing options...
flanker Posted February 25, 2016 Share Posted February 25, 2016 I think yes, if BCLK will be not the limit to CPU overclock I hope, under LN2 will be Excavator similar as Kaveri, so up to 6 GHz (depends on luck). I have surpassed my LN2 x4 965 BE result http://hwbot.org/submission/2344768_flanker_superpi___32m_phenom_ii_x4_965_be_11min_29sec_895ms/ Quote Link to comment Share on other sites More sharing options...
tiborrr Posted February 26, 2016 Share Posted February 26, 2016 Remember, alway use PCIe SSD controller to bypass PCH limitation. Quote Link to comment Share on other sites More sharing options...
flanker Posted February 29, 2016 Share Posted February 29, 2016 thanks for advice man! Seems, I must to buy some cheap PCIe SSD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.