krustybbr Posted March 3, 2016 Share Posted March 3, 2016 (edited) I am looking corsair dominator platinum 2666c10, please PM me with price *CMD16GX3M4A2666C10 Edited March 4, 2016 by krustybbr Link to comment Share on other sites More sharing options...
krustybbr Posted March 20, 2016 Author Share Posted March 20, 2016 g.skill trident G.Skill x 2666c10 also? Link to comment Share on other sites More sharing options...
GtiJason Posted March 20, 2016 Share Posted March 20, 2016 I have a decent set of TridentX 2666c10, but its a 2x4gb kit. If you need a good quad kit I have a TridentX 4x4gb kit of 2400c9 new in box with same date as my set that do 2933c9 12-12-25-1 128 at 2.25v Edit, its a 2013 date so not the new rma ones with 2015 date 1 Link to comment Share on other sites More sharing options...
krustybbr Posted March 28, 2016 Author Share Posted March 28, 2016 you will sell, what value? Link to comment Share on other sites More sharing options...
GtiJason Posted March 28, 2016 Share Posted March 28, 2016 (edited) you will sell, what value? You have PM I cracked the seal on these tonight to determine if I should sell on ebay with other binning rejects and shoot for top dollar since unopened, or if I'd be letting decent hardware rot away in a Mincraft rig. Decided on testing max voltage of 2.15v after low volt warm-up. Only spent about 20min on them and passed 32m no waza 2800c9 uber tight at 1.990v (didn't try lower). Same settings ran 32 m at 2866 but bump v to 2.080v. Here is the final test pretty much same timings but increased tRAS from 15 or 16 up to 21. Final vDimm 2.140v with fairly decent results. Keep in mind this is a quad kit and only spent about 20 min. each kit. Serial no.s ending in 25/26 were tested together first, and then tested 27/28 together so they appear to be matched up well. Edited March 28, 2016 by GtiJason 1 Link to comment Share on other sites More sharing options...
GtiJason Posted March 28, 2016 Share Posted March 28, 2016 Pic at 2800 Link to comment Share on other sites More sharing options...
Recommended Posts