Jump to content
HWBOT Community Forums

Recommended Posts

Posted

post 5,2ghz temperatures min at 25 ° in the end I did it just to not spoil the cpu. I had to select 13 cpu to find the best one.

another thing you can not compare and say that I use WaterChillers the minimum temperatures that my cpu is 10 degrees (the WaterChillers can achieve minimum temperatures of -30) whereas in other part of the world ambient temperature can reach -10, should use cooling liquid with hot water or air heating system without fans?

Posted

I can also do 5,3ghz in the benchmark (XTU) using slow mode there is no problem about this. if you want to go on my facebook and publish them that you can. I only need to bring the voltage from 5,2ghz real 1.538volt to 5,2ghz real 1.56volt

Posted
Coverup to save league change I'd say

 

*cough* IceBucket *cough*

 

post 5,2ghz temperatures min at 25 ° in the end I did it just to not spoil the cpu. I had to select 13 cpu to find the best one.

another thing you can not compare and say that I use WaterChillers the minimum temperatures that my cpu is 10 degrees (the WaterChillers can do minimum temperatures of -30) whereas in other part of the world ambient temperature can reach -10, should use cooling liquid with hot water or air heating system without fans?

Posted

When I started on HWBOT (2013) the rules were different, they have changed I know but also in the first contest of msi who won I used cold water to keep the minimum temperature to 20 degrees for this you make the minimum temperature limit to have.

Posted
post 5,2ghz temperatures min at 25 � in the end I did it just to not spoil the cpu. I had to select 13 cpu to find the best one.

another thing you can not compare and say that I use WaterChillers the minimum temperatures that my cpu is 10 degrees (the WaterChillers can achieve minimum temperatures of -30) whereas in other part of the world ambient temperature can reach -10, should use cooling liquid with hot water or air heating system without fans?

 

-40 if your chiller is build by nacktfalke.

 

BUT,that is the temperature of the liquid,when you have 10 degrees in xtu at 1.56 volts then your liquid temp is somehwere around 0-5 degrees depending on the contact,tim,etc. So if you had 10 degrees idle you used either low-grade Hailea chiller or ice water,no other choice.

Posted
-40 if your chiller is build by nacktfalke.

 

BUT,that is the temperature of the liquid,when you have 10 degrees in xtu at 1.56 volts then your liquid temp is somehwere around 0-5 degrees depending on the contact,tim,etc. So if you had 10 degrees idle you used either low-grade Hailea chiller or ice water,no other choice.

10 degrees in slow mode

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...