evc Incorrect voltage reading

[shar00750]

Hi, i use evc for 5850 dcii and gtx285matrix (both 6208).

everything work but the + is - and the - is + , you can see in the picture i add.

the picture is for 285matrix but it is the same with 5850dcii.

[elmor]

Which version of the evc software are you using?

 

 

Can you try latest from here? https://www.dropbox.com/s/rj6aohe4ln3d0q3/eVc%20v1b5%20161224.zip?dl=0

[shar00750]

Thanks, i will try this varsion. i have another question : i have 7870 gigbyte with chl 8214 and i can't find the scl/sda pin.

http://www.infineon.com/dgdl/pb-chl8203.pdf?fileId=5546d462533600a40153567f657c28ad

[GtiJason]

Thanks, i will try this varsion. i have another question : i have 7870 gigbyte with chl 8214 and i can't find the scl/sda pin.

http://www.infineon.com/dgdl/pb-chl8203.pdf?fileId=5546d462533600a40153567f657c28ad

 

"The eVc device uses the 2-wire/I2C/SMBus interface to communicate. . . . . . This interface works by using two signals (Data/SDA and Clock/SCL) plus a ground reference (Ground/GND), "

 

SMB Data = Pin 18

SMB Clock =Pin 19

Edited December 24, 2016 by GtiJason

[shar00750]

thanks man , i did not notice .