superpatodonaldo Posted May 4, 2018 Share Posted May 4, 2018 I see no cpu limitation, is this division for ryzen 7? Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted May 4, 2018 Crew Share Posted May 4, 2018 In rules: In Challenger Division IV round 2 the processor choice is limited to AMD Ryzen 7 series Quote Link to comment Share on other sites More sharing options...
cbjaust Posted May 4, 2018 Share Posted May 4, 2018 (edited) 2018 Division IV Round 2 I just tried to submit scores for GPUPI for CPU, HWBOT x265 and CINEBENCH and for the the GPUPI I get an error: " Invalid data file: Unable to decrypt the datafile" and for the other two stages I get this error: "Only use processors from the sub family. - your submission is incomplete" Also when submitting a score the competition pop up only offers to add to Stages 1 and 2 (Fire Strike and Vantage) YD180XBCM88AE GPUPI 3.3.2 for CPU_1B_02m-53.228s at 4131-1780 & 1125-1550 R9 390X.hwbot Edited May 4, 2018 by cbjaust add Division... Quote Link to comment Share on other sites More sharing options...
superpatodonaldo Posted May 5, 2018 Author Share Posted May 5, 2018 12 hours ago, Leeghoofd said: In rules: In Challenger Division IV round 2 the processor choice is limited to AMD Ryzen 7 series when I wrote the rules were not updated Quote Link to comment Share on other sites More sharing options...
cbjaust Posted May 5, 2018 Share Posted May 5, 2018 10 hours ago, richba5tard said: The "Only use processors from the sub family. - your submission is incomplete" should be resolved now, can you retry? Yes it works now and I also realised I was trying to put up a CPU score for GPUPI and I've rectified that now too. On another note what format does the verification URL have to be in? Ive Tried "https://www.3dmark.com/fs/15469026 and http://www.3dmark.com/fs/15469026 and just www.3dmark.com/fs/15469026 but it's not recognised as a link by the competition engine... Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted May 5, 2018 Crew Share Posted May 5, 2018 https://www.3dmark.com/fs/15469026 worked fine here Quote Link to comment Share on other sites More sharing options...
cbjaust Posted May 5, 2018 Share Posted May 5, 2018 8 minutes ago, Leeghoofd said: https://www.3dmark.com/fs/15469026 worked fine here doesn't want to work for me... Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted May 5, 2018 Crew Share Posted May 5, 2018 add system pic first and don't save screenshots in png, use jpg, way smaller in size Quote Link to comment Share on other sites More sharing options...
cbjaust Posted May 5, 2018 Share Posted May 5, 2018 I did have a system pic set in that upload, it resets when it fails... I had already selected the benchmark screenshot again before I took the pic of the failed submission. I use png for everything because of CINEBENCH. Quote Link to comment Share on other sites More sharing options...
cbjaust Posted May 5, 2018 Share Posted May 5, 2018 Still doesn't work. Same error about the verification URL Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted May 5, 2018 Crew Share Posted May 5, 2018 Indeed works via normal page, but not via E-sports page, reported Quote Link to comment Share on other sites More sharing options...
cbjaust Posted May 5, 2018 Share Posted May 5, 2018 yeah, but when putting it via the normal page there is no option on the competition pop up to participate and in the expanded option the verifcation link requirement is highlighted as not being met which is why I asked about the formatting required - I should have added I was referring to the competition engine, not the normal hwbot page. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted May 6, 2018 Crew Share Posted May 6, 2018 It should work now, Cbjaust. Plz let me know if you still have probs Quote Link to comment Share on other sites More sharing options...
cbjaust Posted May 7, 2018 Share Posted May 7, 2018 4 hours ago, Leeghoofd said: It should work now, Cbjaust. Plz let me know if you still have probs OK, cool. Thanks. Quote Link to comment Share on other sites More sharing options...
mtrai Posted June 16, 2018 Share Posted June 16, 2018 When I try to add the GPUPI 3.2 I get this error: You are not using a compatible version of GPUPI v3.3 for CPU - 1B: 3.2. You can download the latest version here: https://www.overclockers.at/news/gpupi-international-support-thread Quote Link to comment Share on other sites More sharing options...
mtrai Posted June 16, 2018 Share Posted June 16, 2018 [quote]When I try to add the GPUPI 3.2 I get this error: You are not using a compatible version of GPUPI v3.3 for CPU - 1B: 3.2. You can download the latest version here: https://www.overclockers.at/news/gpupi-international-support-thread[/quote] NM I found the issue...the link for the download gives 3.2 need 3.3.2 Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted June 16, 2018 Crew Share Posted June 16, 2018 Google is your best friend : use the legacy version if you have issues with the normal one https://www.overclockers.at/news/gpupi-3-is-now-official  Quote Link to comment Share on other sites More sharing options...
mtrai Posted June 17, 2018 Share Posted June 17, 2018 Thanks leeghoofd...I got it sorted out. Quick question are we allows to used exotic cooling like LN and stuff? Quote Link to comment Share on other sites More sharing options...
mtrai Posted June 17, 2018 Share Posted June 17, 2018 I got it all figured out...whew it gets a bit confusing...thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.