BOBKOC Posted March 27 Share Posted March 27 (edited) 17 hours ago, zirgonnien33 said: is my card defective? case scenarios: 1/ switch off the electricity supply + after +-30sec reset to default(clear cmos)+ on & check 2/ flash bios by Q-Flash_Plus + 1/ 3/ switch off the electricity supply + take out the battery + on & check ...🤔 Edited March 27 by BOBKOC Quote Link to comment Share on other sites More sharing options...
Alex2305 Posted March 27 Share Posted March 27 8 hours ago, BOBKOC said: xmm🤔 TRY X7p_new ed. Аs an option 690->790(but most likely nothing will change vs 98😉) or official bios That's the strange thing. Official bios works fine. Thank you for your help. Quote Link to comment Share on other sites More sharing options...
sergmann Posted March 28 Author Share Posted March 28 (edited) New XOC bios versions works fine with new CPU’s 13th/14th gen. Haven’t tested it on z690 Tachy but my experience is, bios versions are identical. x7p works fine but not with 12th gen CPU’s especially with 12600. With 12900k/kf you can start each board. If you have another 12th gen CPU which can start without any problems, start board with it, select microcode 0x15 save settings, restart system, power it then off and replace CPU without CMOS. After it you should be able to start with 12600l/kf. Regarding AVX512 and 12600k, it works only without e-cores, so don’t wonder if you don’t have avx512 if e-cores are active Edited March 28 by sergmann Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.