Christian Ney Posted May 17, 2011 Posted May 17, 2011 (edited) We all know ASRock for their exotic products like: 4CoreDual-VSTA LGA775 + AGP4/8x + DDR1/2 4CoreDual-SATA2 R2.0 LGA775 + AGP4/8x + DDR1/2 4CoreDual-SATA2 LGA775 + AGP4/8x + DDR1/2 939A790GMH Socket 939 + AMD 790GX + DDR1 AM2NF3-VSTA AM2/2+/3 CPUs + AGP4/8x + DDR2 K8 Combo-Z Socket 754 + 939 P4Dual-915GL s478 + AGP4/8x + PCIe P4 Combo LGA775 + s478 + DDR1 + AGP4/8x A lot are missed, feel to post them here , I will add them here Just wanted to have them all in this thread with feedback and maybe mods and tricks. just fyi: And not all cups are here, like the feature that allow you to enter the motherboard when you make a submission is quite new. Edited May 17, 2011 by Christian Ney Quote
Crew Turrican Posted May 17, 2011 Crew Posted May 17, 2011 nice, i always use the 4coredual-sata2 board . Quote
Christian Ney Posted May 17, 2011 Author Posted May 17, 2011 On my side I use the 4CoreDual-SATA2 R2 but as QX9xxx is really expensive, I will maybe switch to the AM2/3 board and BE CPUs are cheap Btw it's me or on the 4CoreDual-SATA DDR1 Maxxmem really suck got only 150 Marks (E8400), and ~ 350 using a s393 + NF4 Quote
TaPaKaH Posted May 17, 2011 Posted May 17, 2011 I used to have a couple of "exotic" ASRocks back in the s478 days - one P4Dual-915GL (which ended up in a fireball a couple days after purchase) and one P4 Combo (brand new board DOA) Quote
Christian Ney Posted May 17, 2011 Author Posted May 17, 2011 thx sam, K8 Combo-Z Socket 754 + 939 P4Dual-915GL s478 + AGP4/8x + PCIe P4 Combo LGA775 + s478 + DDR1 + AGP4/8x added Quote
slngsht Posted May 18, 2011 Posted May 18, 2011 I have the AM2NF3-VSTA with a Phenom II X4 970 @ 4ghz on air, 4.3 on phase and I don't recommend it for AGP benching because my 4CoreDual-VSTA would get better results at much lower clocks. The 970 @ 4.3 versus my QX6700 @ 3.1ghz on phase, the 775 rig got better results every time even though the clock speed was so much lower. The AM2NF3-VSTA is almost worthless IMHO. The 4CoreDual came to me warped pretty bad though and didn't last long. I'm going to get another one at some point, but I don't have much to bench at the moment, so I don't have a good reason to get one just now. Quote
knopflerbruce Posted May 18, 2011 Posted May 18, 2011 I have an AsRock s478 board with ddr2 and some fairly new chipset... matx. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.