bob80 Posted June 20, 2012 Posted June 20, 2012 (edited) So, let's talk about this kit of ram...Patriot Viper Xtreme Division 2 2133C11 8GB. They run at 2133 MHz 11-11-11-30 with 1,65V. The kit is composed by 2 modules 4GB each. Pretty sure they are Hynix. So let's remove the heatspreader to be sure ! What about overclocking ? Screen (1,65V) thightest timings 1600MHz @ 7-9-8-27 2T 1866MHz @ 8-10-9-27 2T 2133MHz @ 9-11-10-28 2T 103,2 BCLK to get 2200MHz 2201 @ 9-11-10-27 2T [/center] Mooooar volts... 1,725V and... 2202MHz 9-11-10-15 1T almost rock solid lol Read full review here: http://www.hwmaster.com/2012/06/18/recensione-patriot-viper-xtreme-divison-2-2133mhz-8gb/ Edited June 20, 2012 by bob80 Quote
TaPaKaH Posted June 20, 2012 Posted June 20, 2012 LinX is not a good memory stability test, try HCI Memtest (multiple instances) or Prime 95 just curious - can your kit do spec? I mean - 2133. 11-11-11-30, 1.65V, rest auto, HCI Memtest stable I have a similar set here and it can't Quote
Crew Leeghoofd Posted June 20, 2012 Crew Posted June 20, 2012 Use HCI Memtest as Sam proposed, it's a pure RAM test, quick detection if anything is unstable. Quote
bob80 Posted June 20, 2012 Author Posted June 20, 2012 (edited) I have to run multiple instances ? EDIT: I'm running 4 instances 2133 9-11-10-27 @ 1,65V let's see Edited June 20, 2012 by bob80 Quote
bob80 Posted June 20, 2012 Author Posted June 20, 2012 I am stil running 5 instances of MemTest with at 2133 9-11-10-27 2T @ 1,65V... no errors.... I think they are stable. Isn't it ? Quote
bob80 Posted June 27, 2012 Author Posted June 27, 2012 Christian why don't you post your results ? Quote
Christian Ney Posted June 27, 2012 Posted June 27, 2012 (edited) kk: Full Stability Test (Prime 95 and HCI Memtest) : To read mopre about the testing or/and the full review: Review: Patriot Viper Xtreme Division 2 2x4GB 2133 MHz CL11 Edited June 27, 2012 by Christian Ney Quote
sin0822 Posted June 28, 2012 Posted June 28, 2012 (edited) lol damn that is a lot of testing, nice job! So your full time job must be reviewing for OCAholic then, huh? Edited June 28, 2012 by Christian Ney Quote
bob80 Posted June 28, 2012 Author Posted June 28, 2012 Chris your chart is very intresting Do you think this kit coul get 2666 with high timings and voltages, even not 100% stable ? Quote
TaPaKaH Posted June 28, 2012 Posted June 28, 2012 (edited) with 12-14-13-like timings it probably could, but I don't have a decent IMC to tell what's going on past 1250 Edited June 28, 2012 by TaPaKaH Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.