Crew Leeghoofd Posted September 17, 2013 Crew Posted September 17, 2013 (edited) yep, boots at 1.385 into win7 4/8 and runs 1M, AIDA CPU Queen, PhotoworXX on air. Same CPU runs 4600 1.23Vcore AIDA stress test stable. Re-testing the other one tonite... wished it could do 6100 1 core and 5800 all cores, but nope... None optimised runs with the Corsair 2800C11 CFR kit... +1400 should be doable at them CPU speeds... Edited September 17, 2013 by Leeghoofd Quote
Farjam Posted September 17, 2013 Author Posted September 17, 2013 so voltage on air is not always an important sign , my 6280mhz 01 chip was 4c8t 1.385 only for xp... but not bad with ln2... and i had an 6200 chip for 3Ds and 6050 for 06 that could not boot even 4.8 below 1.4v on air. and some 5ghz 1.41v that can not pass 06 @ 5700 Quote
der8auer Posted September 17, 2013 Posted September 17, 2013 I think you still need low voltage on air but it has to scale on cold and high voltage. My first 4670K did 1,15V 4500 MHz primestable which was a very good one. 6,3 GHz max valid and 6,1 for 32m. I had a 4770K which did 4500 MHz at 1,175 Volt which is just a little bit worse but it did not scale on cold at all. 5,9 GHz max on LN2... But the L313B996 ones which only did 4300 MHz at 1,275 V primestable were 5,5 to 5,6 max valid on LN2. Quote
Crew Leeghoofd Posted September 17, 2013 Crew Posted September 17, 2013 Batch is L316B432 sr nr: 35310047A1952 This chip needs high uncore/NB, eg setting it at 50X would shutdown the setup at +5800Mhz, with 52X it was far more stable... looking for better Quote
Farjam Posted September 17, 2013 Author Posted September 17, 2013 you looking for some chips like this? ... http://www.8pic.ir/images/81643667854035628361.jpg 1.088 for cinebench Quote
Crew Leeghoofd Posted September 17, 2013 Crew Posted September 17, 2013 just want a bulletrpoof retail +6Ghz bencher for 3D 4/4... my quest continues... Quote
der8auer Posted September 17, 2013 Posted September 17, 2013 you looking for some chips like this? ...http://www.8pic.ir/images/81643667854035628361.jpg 1.088 for cinebench And then you end up with a CB at -90°C and a max clock of 5,8 haha Quote
Farjam Posted September 17, 2013 Author Posted September 17, 2013 nope only only only on this one i was not so bad luck cb is -116 and 3Ds 6350-6400 and 6540 pifast, i buy cpus from one same batch to make sure about not a very bad cb Quote
Crew Leeghoofd Posted September 17, 2013 Crew Posted September 17, 2013 What did you expect dino Quote
Crew Vivi Posted September 17, 2013 Crew Posted September 17, 2013 interesting cache behaviour there albrecht, i have found my chip shut down earlier than normal sessions, so ill try mess with cache a little Quote
nfszocker Posted September 17, 2013 Posted September 17, 2013 5.65GHz/1200MHz and 1370m of score, is no good efficiency;) Quote
Crew Leeghoofd Posted September 17, 2013 Crew Posted September 17, 2013 No tweaks applied to the rams as mentioned in the comment this is done on a daily OS too... just testing a CPU... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.