Crew Leeghoofd Posted October 17, 2013 Crew Share Posted October 17, 2013 But a very nice CPU there man !! Sweet ! Quote Link to comment Share on other sites More sharing options...
Calathea Posted October 17, 2013 Share Posted October 17, 2013 Thanks It's good for high load situations, might be good base for 3d-bench system on single stage cooler. I think I have 10+ graphics cards waiting for better times. Quote Link to comment Share on other sites More sharing options...
BenchBros Posted October 17, 2013 Share Posted October 17, 2013 Nice CPU... I guess this is the sweet point between temp and vcore? Which temps you are running at 1,6V? Quote Link to comment Share on other sites More sharing options...
Calathea Posted October 17, 2013 Share Posted October 17, 2013 Honestly the cpu doesn't scale with much more volt. I think it's a low leakage cpu. Coldbug is at -120, I started at -115, pulled down to -125 and let it warm up to about -118 at the end. Then some heatgun to prevent cold bug. Â Btw, max pi 1M is 6300 MHz 1.65 Vcore. Quote Link to comment Share on other sites More sharing options...
BenchBros Posted October 17, 2013 Share Posted October 17, 2013 -115 is nice... I have problem with both 4670K I tested that higher voltage results in higher temp. So voltage up = temp up voltage down = temp down So voltage have very big influence to temp! So I had to find the sweet spot between temp and voltage. Was around -50 to -70°C and around 1,7V.  With 1 core temp very very much better (around -100°C with 1,92V)... Quote Link to comment Share on other sites More sharing options...
Calathea Posted October 17, 2013 Share Posted October 17, 2013 Benchbros, I don't get it. Why only run -50 to -70? Quote Link to comment Share on other sites More sharing options...
steponz Posted October 17, 2013 Share Posted October 17, 2013 Likely because of cb, i have chip with cb at -100.. Quote Link to comment Share on other sites More sharing options...
steponz Posted October 17, 2013 Share Posted October 17, 2013 Nice chip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.