filmbot
-
Posts
257 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by filmbot
-
-
4790K pending for Samsarulz
4790K SOLD to Samsarulz
Open to any offers on the RAM and combining them if you'd like
-
Very close to going, finalizing the hours at work.
I have an older dewar that I've never used and don't know what the seal is like but think it's either 30l or 50l. If I go I will flying in so can't bring it but will be in Chicago at some point the next two weekends, so any Chicago heads that are driving and would like an extra dewar, I can drop it off while I'm up that way.
-
4790K pending for Samsarulz
-
Bump for price drops! Open to offers.
-
PM on hypers.
-
ASRock Z97 OC-F sold to Hilderman
-
Does your 4790k has better/good/outstanding IMC or is just a regular 4790K?
I ask since I would like to do the same overclock achieved with those memory kits.
Regards
I suppose that is the determination of yourself or any potential buyer. All results posted above were with that chip and that motherboard. No other ASRock OC-F or 4790K was used nor do I own. I also have a Samsung based GSkill kit that was very easy to achieve 2800c9. Only thing I ever felt held back by this chips IMC was I was told the OCZ set could do 2666mhz 8-11-7 tWCL= 6 but I never could get could tRCD value down to 11 @ 2666mhz.
-
If MB never cold, all tests were made with air/water?
Do you accept offers or those are the prices?
Regards
Correct, no cold only EK Supremacy with 2x140rad (4x fans) on Dimastech open bench in normal room temps, nothing special.
I'll look over any offer but I'm a little firm right now as I feel most of this stuff is already priced to move. Regarding the motherboard specifically this will be full box so take that into account when thinking about shipping that is included.
-
Interested in the asrock ocf. Are you saying that's a brand new board? I think you mentioned you had one for rma a while back.pm sent
Board was purchased brand new from Newegg end of November, seen at most 2 weeks of action, full accessories. RMA you may be thinking if I mentioned returning OCF-M to then buy this board.
PM replied to and screenshots added.
-
That time where I need to consolidate and moving on from this platform. Any offers are welcome but not looking for trades right now.
Heat: filmbot 39-0-0
Shipping: All items including shipping to US48 via USPS, international PM me to discuss
Payment: Google Wallet, PayPal, Dwolla, Chase, bank transfer, NO WESTERN UNION, anything else we can discuss if necessary
TridentX will be posted once I find screens. May add GSkill TridentX 2x8gb 2400 10-12-12 1.65v and GSkill TridentX 2x4gb 2666 10-12-12 1.65v.
OCZ Reaper 2133 7-10-7 1.65v DDR3 (PSC)
Price: $60
Easy sticks to do 32M 8-12-7 tWCL= 6 2666mhz @1.92v, supposed to do tRCD= 11 but personally never could, could probably be tightened up but just plugged in PSC profile and ran
Corsair Dominator GT 3x2gb 2000 8-9-8 1.65v DDR3 (PSC)
Price: $55
All sticks easy to do 32M 8-12-8 tWCL= 6 2666mhz @1.92v, could probably be tightened up but just plugged in PSC profile and ran
GSkill Ripjaws 2400 10-12-12 1.65v DDR3 (??)
Price: $35
Just ran as dailys
SOLD ITEMS
Intel 4770K
SOLD to playah at [H]
Batch#: L310B492
Delidded and replaced with Coolaboratory Liquid Ultra, 5ghz 32M 4/8 @1.4v, think FIVR is borked so have to set 1.15v in BIOS for stock speeds to boot into Windows
ASRock OCF Z97 motherboard
SOLD to Hilderman
Never cold, just bought, all accessories included.
Intel 4790K
SOLD to Samsarulz
Delidded and replaced with Coolaboratory Liquid Ultra, lapped, no idea on batch, 5ghz 32M 4/8 @1.45v
GSkill RipjawsX 2133 9-10-9 1.65v DDR3 (PSC)
SOLD to Reefa_Madness at [H]
Easy to do 32M 8-12-7 tWCL= 6 2666mhz @1.92v, could probably be tightened up but just plugged in PSC profile and ran
-
What's up with all this offers/auction type stuff recently? Thought you had to post a price for gear....
Exactly. Either you're selling or you're not.
-
Picked up some vengeance pro 2x8gb 2400 c11-13-13 with unknown hynix ICs and they clock very high with this platform although channel b (2 outside slots) won't run past about 2500
/Pics
I took off the heat spreaders but corsair branded and markings lead nowhere
This single stick speed? Pass any benches?
-
PM incoming
-
Want so bad but like you said, hard to find. Looking for quad kit. Good luck!
-
Pick up some very cheap Vengeance Pro 2x4gb 2400 c11-13-13 1.65v which have dual sided Samsung BYK0 Q die and this was 1.5v with full xmp settings and my 7650k that was only good for 2500 with PSC
/Pics/
Also improved my 7400k sub
2k finally broke! :celebration:
I keep wanting to move away from this platform for others right now but the fact that I can try to hunt down a cheap RAM kit and get way better scores is really sucking me in!
Has anyone noticed a difference between 2x2gb and 2x4gb? Between both scores and speed potential?
-
Ran a few quick and dirty runs last night on the same OS as my FS runs and juuuust broke 13mins. No tweaking in OS or even BIOS, just run volts and up multi. Don't have a screen but had CPU @ 5200mhz, RAM @ 1200mhz and NB @ 1600/1800mhz (can't remember but didn't manually set, just auto).
So now I do feel better about getting that low, just didn't think Kaveri was gonna scale that well. Guess now I have something else to aim for
Also, I'll stop talking Pi, gotta keep this thread 3D! :nana:
-
yes, it is stille the best to use winXP
But I think, with good Kaveri/Godavari chip and LN2 is possible break AMD Superpi WR 32M. Kaveri is much more effective in this old benchamrk. Not much in 1M, but in 32M.Seems like that is unlikely. Sub 10mins doesn't seem doable and to take AMD crown, would need to shave off almost 45s from that.
http://hwbot.org/submission/2466566_hivizman_superpi___32m_fx_8350_9min_19sec_828ms
-
You can get the overall usage figures for each of the graphics cards by either checking the participants in the hardware rankings (per benchmark) or hardware pages (total submissions). By using the search function and selecting the option "Best submission" under "other" you can count the amount of users.
It's a bit of work, I know.
Specific lists like the one I posted here are only possible with database access.
Thanks for the info. Eh, not that much work
Just always wondered about this to try to find most "valuable" hardware and thought popularity=value. -
It doesn't run for more than a few seconds under load, 1440 was max stable I could get but couldn't beat Gorod's score because imc is too weak
Yep, that is the real factor in uncorking these guys. Not sure if it's pure "IMC" or if it's the memory component of the iGPU. Guess I could start running Super Pi with iGPU disabled to see if it starts scaling past ~2666mhz.
EDIT:
I also did some tests to see if lowering amount of RAM dedicated to iGPU would help scale mhz but didn't notice anything.
-
Just a tease for now and cpu cbb at -60 do it's a pain
Strong, strong core. I may just have to run down to MicroCenter tomorrow and pick up a 7870K
-
PM incoming
-
FYI, here's a list with all the graphics cards that had more than 100 overclockers use it, in order of popularity.
GeForce GTX 970 GeForce GTX 980 GeForce GTX 980 Ti GeForce GTX 760 HD Graphics 4000 GeForce GTX 770 GeForce GTX 960 GeForce GTX 780 GeForce GTX 750 Ti GeForce GTX 780 Ti Qualcomm Adreno 330 GeForce GTX 660 GeForce GTX 980M GeForce GTX 970M Radeon R9 290X GeForce GTX Titan X GeForce GTX 670 Radeon R9 290 GeForce GTX 680 GeForce GTX 860M Mobile HD Graphics 5300 Radeon HD 7970 Radeon R9 280X Radeon R9 390 GeForce GTX 660 Ti GeForce GTX 580 Qualcomm Adreno 320 GeForce GTX 750 HD Graphics 4600 GeForce GTX 560 Ti GeForce GT 740M HD Graphics 3000 Mobile HD Graphics 5500 GeForce GTX 650 Radeon HD 7950 Radeon R9 270X GeForce GT 750M GeForce GTX 570 Mobile HD Graphics 5000 Qualcomm Adreno 305 Mobile HD Graphics 4400 GeForce GTX 480 ARM Mali-400
Thanks for this pull. Little OT but is there a way for us to pull these numbers?
-
Anybody close to Atlanta ?
Not aware of anyone from Florida but closest off the top of the my head is Gunslinger who is down South.
-
Love the pics @Gorod. Is him/her a regular visitor?
@The Stilt - Always great to see you posting! Your insight into the AMD platforms has been amazing to follow over the years. You're one of the reasons that I still want to keep AMD parts around.
Fired up the Kaveri rig again last night and thought I was getting 1320mhz on RAM to pass FS but seems it was a fluke. Gonna stop testing FS and move on to other benches. Heard about the new 7890K and thought about getting one at release but think I'm gonna hold off till AM4. Really enjoying doing iGPU benching!
Like I mentioned previously, next iGPU rig will be the Kabini setup but don't think I can get the phase strapped to it just due to mounting.
HWT North America 2016: Who's coming ?
in HWBOT World Tour
Posted · Edited by filmbot
Looks like due to my vacation in June I won't be able to take Friday off and fly in Thursday night. Would it be worth it if I could fly in later Friday evening?
EDIT:
Guess what I'm saying will I miss all the fun stuff coming in that late? If not, I'll book today/tomorrow and tickets to confirm I would be going.