Christian Ney

congratz random.org

does having artifacts give more fps ? or less ?

So close to 5Ghz with a 90nm CPU on air. ambient: 19°C Powered by Noctua NH-D14 vcore: 1.55v

So close to 5 Ghz on air using 90nm cpu ambient: 19°C Powered by Noctua NH-D14 vcore: 1.55v

So close to 5 Ghz on air using 90nm cpu ambient: 19°C Powered by Noctua NH-D14 vcore: 1.55v

So close to 5 Ghz on air using 90nm cpu ambient: 19°C Powered by Noctua NH-D14

Congratz

These are real, there is no photoshoping

His DNA: The CO2 curve: 2012:

Thx Cause of the ''suport tickets'' subforum, still bugged. I removed the code and added the link only now it's ok

The P4T-M from Asus too: http://valid.canardpc.com/show_oc.php?id=1706957 thx

Ticket ID: 1211 Priority: Low Here is the CPU-Z link http://valid.canardpc.com/show_oc.php?id=1703032 Thx

I tested all bios settings such as Command Rate, Static Read Control, Performance Level(aka tRD), all DIMM slots, AI Clock twister, and finally dual channel(using 2 sticks of course ). Under SuperPi 1M, PiFast, MaxxMem, WPrime, and PCMark. Results were all of those settings only have an improvement under MaxxMem and PCMark. That's why I use only single channel, as dual channel was useless to improve the score EDIT: And you why do you use dual channel btw ? Maybe with ddr3 there is an improvement.

héhé under cascade it's no more 520 FSB Wall, it's 551. Good job

Really nice, the one I sent you roxx under cascade. Still under my gold chip on air(fear the day I will have the cascade ), I will do 600Mhz Seems DDR3 helps

I found something interesting: http://www.intel.com/support/graphics/intel852gm/sb/cs-009067.htm seems we have to rename and add some categories

Here are the pics, as I took big pics, I will only link them and not put them here, cause 18MB to load is much(here for me ). With the LCD Poster btw you can diagnose the board from the LCD Poster using buttons. [/img] I put only one CPU here, cause I don't remember where I let the VRM module for the second CPU So I fit the ''.......'' on the second CPU Slot Last pic showing the board with the RDram Expander: Btw I have a score better of 13s under SuperPi than on my SDRam setup, but it's still slower than with Overclocking, so it's useful only if you plan to get good scores without OC, or if you find a board that can be OC with Rambus on Slot 1.

Have you got both specs ? please, cause seems that on Intel website they boath have same specs thx I translated for you

Yep, one of my freind's father has got a DEC Alpha under NT 4.0 I still wait to bench it

thx for the hint, I will check what you said. Yes I have the pause/break button. Yes linux for sure, but if I want to bench, I need windows NT. Afaik it's impossible to install windows XP on it

I haven't managed to access the BIOS

not as bad, want to see other benchmarks btw why only 5.2 ghz, you have a 5.6ghz chip

hum found an UltraSparc III from Sun, but unfortunately I haven't taken the whole server, only the board/cpu/memory. And this S**** only reconize magic ID of original drives, so atm impossible to boot. Damn

hum finally seems RDRam is not really faster than SDRam, quite but not as much Useless for bench, but I can build a funny server I know that you will for sure read this thread, can you add this board please : XU800 from HP: http://valid.canardpc.com/show_oc.php?id=1703032 thx