Jump to content
HWBOT Community Forums

nachtfalke

Members
  • Posts

    859
  • Joined

  • Days Won

    8

Posts posted by nachtfalke

  1. Nice nacht. Congrats. What points you using to take vcore off the hero?

     

    i solder always on my boards 2 wires( +VCC and GND) from MLCC back side socket to read with accuraty on my DMM , even some board has vcore check points ...

    on Hero if you use LLC lv5 you got a bit undervolt in load! if used llc lv7 you got 30 -35mv overvolt that you set in bios!

     

    also chip can do 5 ghz uncore on air and max tested was 5200 core at 1.28vcore cinebench R15!

    • Like 1
  2. thanks to all:D , to bench an SOC card is not easy at all:D to unlock the SOC power is a bit difficult , because they use gpu and gddr pwm fully of protection , without VID mod you can´t push volts in these cards! ovp gddr "kill" these cards , also the cascade has no problem to pull down an power hungry gpu like GF100 ...i build this cascade for war:D

     

    So do I. Your work with SS and cascades is simply AAA+. But, you will not sell me one as our common friend Alex@ro tells me :)

    GREAT JOB MAN !!!

     

    sorry man , i really don´t build units for sale purpose , i have a full time job even weekend some times ! no time at all , build an strong cascade is not easy , in specially tunning his load temps , that can durring long than building hardware hole cascade:D...

×
×
  • Create New...