Jump to content
HWBOT Community Forums

nachtfalke

Members
  • Posts

    860
  • Joined

  • Days Won

    8

Everything posted by nachtfalke

  1. 3218B987 7ghz+ done:D http://valid.canardpc.com/show_oc.php?id=2686590
  2. i have one wheelbarrows of dead card´s too=)) 80% ebay cards is with gpu/ram- reball /reflow
  3. I saw in your other submision pci-e 1.1 x16....i had same issues with 2 cpu...the pci controller inside the cpu is degraded...this means low performance especially Nature ,respectively in other benchmarks what use vga brute force check on air cooling the pci-e speed with more that one vga ..when the issue persist= cpu rma
  4. low performance pci 1:1 , force in bios pci gen2 , or try another mb slot:) anyway nice!
  5. ...and a nice price too great handarbeit:)
  6. push the pci gen2 in bios , and use x16 slot ...your N is to small for those freq , anyway nice score:)
  7. Batch# 3233B929- Costa Rica max cpu frecv: 6360mhz / full pot ( -196) / 2.0 V ftw ...2.05 v = cpu kaput ... http://valid.canardpc.com/show_oc.php?id=2617219
  8. yep , Hynix is better than Q , and Samsung the best:) , G92 is complicated benching ...have no bios support , cold slow , cbb , cb ...is difficult ...and the good vga under ln2 is very rare, this vga on air cand do 950/1250... for you vga y need reverse ram vmod , the default voltage is ~2.00v , qimonda scalling with 1,850 or 1,9-1,950v, must droop down the voltage
  9. this vga can 1250+ ram on air cooling , but on LN2 it is crappy ram ...the gpu can over 1100 mhz 1,55 and -80 , but the ram have a strange behavior with cold.. ram is Hynix FP1
  10. batch#3229A925 air test: 5 ghz4/8 1,350v LN2: max 6525 , over 1,850v no more scaling , 3D around 6100-6150 very hard http://valid.canardpc.com/show_oc.php?id=2615180
  11. yes, when have you more than one run with ~same score , then is not a bugged score .. sorry for inconvenience:)
×
×
  • Create New...