I ran SuperPI 32M for the time being
The CPU runs up to 4.9G, but after that, even if the voltage is 1.5V or more
Will fall
I'm at a loss what's wrong
Simply my CPU no limit? Set LLC to 3 and disable SMT on the BIOS
C state disabled 3 core selection only
I would appreciate any advice
Okay
SMT is OFF only for 3 cores
Set to 4.8G on BIOS
Voltage starts automatically
In TurboV Core, the voltage at this time is 1.4V
Memory applies only XMP and does nothing
Is it simply a low voltage to raise it to 5G?
Is there any control working?
Hello everyone
I would like to challenge the 5G challenge with 5600X and C8I.
First of all it is difficult to set the CPU to 5G
At present, it will drop even at a voltage of 1.5v at 4.9G.
AMD has little experience so I would like to ask professionals for advice.
Is PBO setting important?
Where do I need to set it in the BIOS?
I returned the CPU to 10900k and booted with BIOS 2 without any problems
No response when I press the power switch on the motherboard trying to flash back the initial BIOS 0607 to BIOS 1 and boot it
If you change to BIOS2, the motherboard will turn on,
Since the BIOS does not support 11600KF, it is natural that it will not boot, right?
Is BIOS1 broken?
Separately, I own a Z490 APEX and a 10900KF
I succeeded in using XP for Z390 as it is and starting it.
Blue screen on shutdown
Please tell me the necessary changes etc.
Is it impossible to make it work as it is?