Jump to content
HWBOT Community Forums

ShmoeMo

Members
  • Content Count

    68
  • Joined

  • Last visited

Everything posted by ShmoeMo

  1. Can i have my name changed from "(PTP) ShmoeMo" to just "ShmoeMo" please.
  2. Hey there. Do you still have the LN2 pot? also is it the galax version of this one? they look identical. https://www.performance-pcs.com/water-cooling/liquid-nitrogen-hardware/bitspower-geforce-rtx-20-series-vga-ln2-pot-bp-vgln2.html
  3. This explains my issue then, bluescreening on install with an ACPI error. Sucks that the kabyx cpus are only quad core
  4. i have tried different drivers and gpuz also reports the card is only going to 500mhz
  5. Hey guys. I recently got a water blocked reference HD 6970 and the issue im having is that the core wont go over 500mhz, even if i set it in afterburner or ccc but the memory does what ever i tell it to do and runs at normal stock frequency of 1375. the only physical issue the card has that i can find is that the vrm temp sensor is munted so it reports a constant 254c to gpuz and 115c (i think) to hwinfo so that tells me the sensor isnt working at all. the card goes between 2d clocks / baseclock and 500mhz fine but wont go over. i have reflashed the card, tried different mobo, used ddu and
  6. Hey guys, don't know if anyone can help me here but i recently got my hands on a z77 mpower for next to nothing as the seller listed it was unreliable. The only issue i can find as of yet with it is that when the psu mains switch is turned on the board powers up instantly but it doesnt actually boot up till you hit the power button (video below). i Decided to probe between the PS-ON pin and GND of the main 24 pin on the board and i have found there is a 800 ohm short between the 2, i have probed a few other z77 boards and found they are well over 4 meg ohm. does anyone know the circuitry that
  7. I assume cpuz has a bug of some sort reporting the cpu name?
  8. just letting you know you have to include a screenshot with cpuz and gpuz in it. like this one https://hwbotstatic.s3.amazonaws.com/img/examples/Unigine%20Superposition%20-%201080P%20Xtreme.png
  9. Nice score bud. Will have to get my 480 back out and have another go :p
  10. So after reading both or your comments i decided to plug in my monitors line in so it had some form of audio output and bam it works great now. weird thing is if i unplug the monitor it still works so im sthinking maybe the benchmark just needed to be able to link to a primary audio deivce just once and it still thinks the audio device is active even when unplugged. Cheers for the help guys, Much appreciated.
  11. Hey guys. Got a problem with the HWbot version of heaven. If i run the HWbot launcher for heaven using nvidia cards and run the basic benchmark it freezes a few seconds into the 8th scene or at the start of the 7th but the system is still somewhat responsive. If i run it with AMD cards the benchmark freezes on the startup loading screen and the system is still somewhat responsive but if i run the extreme benchmark through the hwbot launcher its fine using either amd or nvidia. If run it using either nvidia or amd from the normal heaven launcher and use the basic settings it runs fine and doesn
  12. so sorry i never seen this comment bud. it depends on whats causing the bad temps. whats the voltage and frequency you running?
  13. na sorry buddy. there is no documentation on this chip and asus for some reason say that the documentation on this chip is confidential which is BS, like ffs the card is 10 years EOL (end of life) i think they can release details on ancient cards without worrying about people stealing designs from them. If i ever get around to probing the surrounding resistors and finding the feedback pin i will let you know, as i need to know it aswell. i need it as i am having a friendly battle with someone else for a top spot XD
  14. ahhh ok, thanks for that :) ill have a play around and see what i can do. Defs wont be able to come anywhere close to this score though
  15. Mind sharing a little info on the sli profile? ;p i found one but it barley made a difference haha.
  16. How did you get sli to work on this benchmark with the 690? when ever i enable sli it runs like ass haha
  17. Just normal solder. I mean if it cracks after a few runs i have no problem reflowing it. just curious if it will
  18. Yeah i might take it into work one day and unsolder it after eating the bit our and drill the other holes out. for more surface area. you dont think i will have problem with the solder cracking at such low temps?
  19. Hmmm i might have to give that ago. Will be a little while before i use it though. Got alot of stuff coming up soon
  20. Hey guys, thought i would post the homemade DICE / LN2 pot that i designed and made. It starts with the base, it is a solid slug of copper that is 65mm x 50.8 that i purchased for 60 odd AUD on ebay after asking the seller if they could cut a custom length. I then had a 20mm hole drilled down the center of the slug about 45mm deep and the plan was to surround it with 10mm holes the same depth but that was quickly thwarted after finding out how hard copper is to drill as you will see in the pictures there is a smaller hole becasue i snapped a drill bit off in it, in total i broke 3 drill bits t
  21. If it was set to "off" would that explain the funky voltage with no current capability on my output? Will have a look at setting the VID tommorrow
×
×
  • Create New...