GRIFF

I answer you only because I have respect, even if the question of your investigation is not pleasant. I made a video quickly with SS where you see the CPU from on and I managed to make 1180mhz to the spi just because I used a power supply with the 3.3V not adjustable. If it's not good for you or mods, delete all my results from this competition. I'm here to have fun and not stress.

Although it is the only way to verify the goodness of the die.

@Mr.Scott you checked all you cpu's with 1/3 divider?

For my experience: the best air cache is about 400mhz without overvolt. then with divisor 1/2 you reach 800mhz on the cpu, with 2/5 you reach 1000mhz on the cpu and with divider 1/3 1200mhz on the cpu. With the NEC cache, the most widespread is 370mhz about without overvolt and 385-390 with overvolt then with the cold it reaches 400-405. I have not tried, for lack of time, with an overvolt and cold the cache that makes 400mhz to air I will do it in the next days. This Pluto 800 I arrived late for the last cup on slot A, where unfortunately my Orion 950 died in an attempt to set 10.5 multiplier, always welding the resistances on the cartridge. Summing up, I wanted to say that if you can not change the divider to 1/3 difficult to exceed 1ghz. Unfortunately changes divider cache through software unnecessaru in this case.

With Goldfinger can you change cache divider?

Ok ok no problem. I have little time these days, but for the weekend I should succeed. I have to look for the plastic cover that I do not remember where it is. However for the next time, before writing that people change, ask, maybe answer is completely different.

Thank you Kotori-san. I need another motherboard and change the cache chips on cpu, is the max for overvolted Nec chips on air.

Go go wr need 150+ ))))

Ok. Managed. To change the multiplier and the divisors of the cache, not having Goldfinger, I changed the position of the resistances on the cartridge as per this guide: https://www.ocinside.de/workshop_en/athlonresistors/

http://hwbot.org/submission/3854708 Wrong cpu type in this sub. My error of digit. today I take pictures of the die.

What happen man?

Nice score Kotori-san.

I do not see a privileged team or individual in this cup, for the moment.

We do not always understand the organizers' intention, especially when there are unclear rules and stages with little-explored HW. But slowly we all learn.

Accept both options.

It may also be that the software used to make the screen is heavy and I could not do better.

@ozzie Wich team?

This is max screenshot saved. Very unstable system.

Then you have to specify to mark the frequency of the screen although valid can have higher frequency. But I think a concept a bit wrong for competitions where you are pleased to see new WR.

Photo of the screen not allowed for me: i have video and photo with wprime at 841mhz but not posted because can't made screen.

Hi guys. My opinion. With this platform i'm made validation file at 940mhz but screen only at 878mhz, if you want delete my score, is not problem for me. If i launch 3 cpu-z tabs the screen with max freq is 856mhz.

clock generator of this motherboard?

Bravo!

Nice frequency for stock voltage. Cpu over 800mhz on SS.