Jump to content
HWBOT Community Forums

GRIFF

Members
  • Posts

    984
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by GRIFF

  1. On this board I can run ddr2 up to 580mhz (limit of the board) CL4-4-4-12 at 2,45V on bios. 580/2=290mhz of fsb it is possible with 1:2 divider and great cpu. When i find this cpu I
  2. – So, into the bios i have possibility to manage multipliers. With intelspeedstep on i can boot at 16x, with intel speedstep off i can boot at 6x, 7x, 8x. But i have possibility to manage multipliers on windows without problems with rmclock and systool.
  3. So, into the bios i have possibility to manage multipliers. With intelspeedstep on i will boot at 16x, with intel speedstep off i will boot at 6x, 7x, 8x. But i have possibility to manage multipliers on windows without problems with rmclock and systool.
  4. but this month I have been concerned to operate on lga775 with cpu s479 . There are some results , you will see them in the coming days .
  5. So. With Vcca mod i have to boot Windows up to 265 of fsb, without maximum 225. the Vchip fsb frequencies must be useful anyway. I try.
  6. Mmmmmm thanks for info. Do you note any difference before and after this mod?
  7. Limit of FSB depends a lot on the type of RAM you use. Only with Samsung TCCD I managed to climb well, with the other RAM limit was around 330-340. Then also he goes to luck with the processor because only this had not fsb wall. This motherboard is the worst between the two I have. As soon as I finish doing tests with this, I make the final changes to the other and shooting with LN2.
  8. VERY VERY NICE. 290MHZ FSB AN 3D IS VERY GOOD. CONGRATULATIONS. DO YOU HAVE ANY CHIPSET REGISTER MODIFICATION?
  9. Make a Vnb voltmod at P4C800 rev.1. Result obtained at 2V on the NB with air cooling. This MB have a 371 mhz at 1,79V on the NB. next step LN2 on NB:)
  10. fsb 400 it is possible))))) Time to motherboard modification....
  11. Microcodes and something more. With Asus boards doesn't work without mods.
×
×
  • Create New...