[The official February Team Cup Warm-up Contest thread.]

Actually Voodoo4/5 can run GT1... however it requires some sw hacks via 3D analyze...

This way you can run even 3DMark 03/05 completely.

[The official February Team Cup Warm-up Contest thread.]

Voodoo won't run 3DMark 03.

 

 

Just wondering - am I the only one who has a full set of hardware (though, pretty medium to fight for rankings)?

[HWBOT Memebase]

LOL, Genieben! That's the pain for benchers like us.

[How to submit Catzilla score?]

Gunslinger, you have to rename your last submission (with a timestamp as a name) to be able to upload another one. The new one will get a timestamp as a name.

That's how it works for me (did spend some time to figure out). And yes, sometimes their pages just don't load. You have to refresh them manually.

[The official February Team Cup Warm-up Contest thread.]

Need about 1.5-2 months to make a good Pentium 2 score

[Mat_Agnesi - Mobile Celeron 925 @ 3623.5MHz - 2419.17 pps HWBOT Prime]

Very nice, fellas!

[The official February Team Cup Warm-up Contest thread.]

Massman, any chances to get more time? Some stuff isn't available in my desk

[The official February Team Cup Warm-up Contest thread.]

What is GT610?

 

Got everything else.

[Feature requests : Please, add MoBo]

Thanks!

[[General] - Any question too big to remain unanswered but too small to start a new thread for ...]

Genieben, read my post attentively - I've been referring to Team hardware points

[[General] - Any question too big to remain unanswered but too small to start a new thread for ...]

Again a bug with posting a submission with the same score:

http://hwbot.org/submission/2421551_antinomy_cinebench_r11.5_core_i7_3612qm_5.65_points

http://hwbot.org/submission/2468955_blu3_cinebench_r11.5_core_i7_3612qm_5.65_points/

 

Earlier there was a bug affecting personal score (ranking newer subs higher). Now it looks like the same bug with Team Power points.

But I could submit without being affected by this bug:

http://hwbot.org/submission/2447086_marquzz_pifast_core_i7_2640m_21.61_sec

http://hwbot.org/submission/2492107_antinomy_pifast_core_i7_2640m_21.61_sec

Was it fixed and if yes, how do we recalculate the old score affected? I tried to recalculate the score and to edit the submission - nothing.

[Feature requests : Please, add MoBo]

Please, add MoBo

VAIO VPCZ23T9R

 

http://valid.canardpc.com/k5in7p

[Happy Birthday Massman]

Happy Birthday, Pieter!

[Doubtful AMD Socket A submissions from RIBEIROCROSS]

I must say that I totally agree with you. Just to clear things - I'm not mad with your joy. But for the years I'm here, I've seen enough "strange" results that turned out to be cheating (mostly edited screens) and from my experience it's much more likely that someone who I don't know is simply fiddling than using some knowledge beyond mine.

 

It's nothing personal, do understand. But I'm afraid it'll take some time for the moderators to reproduce and check your mod.

 

Fear not if you've got truth on your side.

[bud_eric - Phenom II X2 560 BE - 36295 marks PCMark 2005]

I'm more impressed by 1837MB/s General Usage. I think this is a new world record, no less

[Doubtful AMD Socket A submissions from RIBEIROCROSS]

I agree to ObscureParadox - unless it doubtful, I'd keep some of my tricks as a little advantage. I did put effort in some of my submissions and Mr.Scott, you are aware of it. This is a totally personal issue. If the moderators just said "we've checked this mod, it works and it's legit", I'd be fine without knowing what it is.

But it is still to be checked - I don't get why the boards settings don't work and wires connected to same places do. Same for the pullup resistor remove.

[Doubtful AMD Socket A submissions from RIBEIROCROSS]

riska, what you are talking about is Duron Applebred 1600MHz. And yes, all you've described is pretty normal.

Mr.Scott, so it's an unsoldered L3 pullup with manual switches, what do you think?

[Doubtful AMD Socket A submissions from RIBEIROCROSS]

Another little bump.

[P4C800 deluxe bios]

I already have one, it's Mr.Scott

[Please add cpu]

Hi, sparkey!

 

If you take a look here: http://hwbot.org/hardware/processors#key=pentium_4_s478

you can see two Pentium 4 2.6 - the "regular" 2.6

Pentium 4 2.6 GHz Northwood and Pentium 4 2.6 GHz C Northwood (HT)

the latter is 200FSB and 13x multi. The regular is FSB100 and 26x multi. If you find x13 in your category, click report on them or write a PM to Genieben. Don't tell him I sent you

[minos - Pentium 4 3.0 GHz Prescott @ 3955.6MHz - 114.2 MPT-score UCBench 2011]

I'd say more like a bugged run - the 64 thread is way out of line.

[Old school OCZ Platinum OCZ4002048ELDCPE-K suggested settings]

But 512MB sticks clock better because - Winbond and Micron, yes.

[Most benched CPUs since 2007 - i7 2600K used for 29% of the subs in 2011!]

Is it possible to get stats for most benched CPUs for non "X" and "K" models? I want to know how reduced percentage of non XE cpus at hwbot after SB announce. Total numbers are welcome too I think it would be interesting.

 

Perhaps, you've meant - Intel CPUs starting from LGA1155. because besides 2600K there's LGA775 left and AMD. Or you mean the whole statistics, for AMD and old sockets too?

[HWBOT Competition Feedback thread]

whats about classic gpu? for example:

stage 1 nvidia agp (limited to gf5 or 6)

stage 2 ati agp (limited to radeon 9k)

stage 3 voodoo

stage 4 non nvidia/ati/voodoo agp (kyro/sis/3d labs...)

Some good old school. I like this freaky guy

[HWBOT Competition Feedback thread]

The 300A's use mendocino cores is it?

Yep, Mendocino for 300A and Covington for 300. After these, Celerons used same cores as Pentium.

 

Mr.Scott, nasty suggestion