Seby

Very warm hmm, try leave memory settings all auto, only set FLL OC Mode to Ratio OC, disable ecores, set vcore and core ratio, and apply settings when cpu is at -100 so that you don't change cpu temp too much after training mem. Then see how cold you can go in OS. If you have a cold bug, then raise CPU Input Voltage, first to 2.3 to see if it makes any difference. You can try up to 2.7 if it does help.

Make sure RSVD_1 and RSVD_2 switch are set to Off Edit: Actually having it boot ever is weird if you were to have RSVD_2 enabled, I guess also make sure to not be using Maximus Tweak Mode 2, as this loads skews that only work well at ln2 temp.

Nice efficiency, excited for you GPU ln2 run

I could boot 9200 at these settings before and run 9250+ geekbench stable. So I want to figure that out again instead of this 9066 boot + bclk. Also couldn’t use my latest tweaked win 7, only the last one I uploaded. So let’s see what else I can do at home

No

Need z690 for sli on win 10/11, but low on ln2 so didn’t end up doing that lol

DifferentSLI doesn’t need bridges or x8

Not needed on z690

Thanks for the kit! Limited by Taiwan humidity 😂

I made a tiny program to do this for you, just put the saved IFR on top of it. I'm a noob at programming so hopefully it doesn't break too easily. ECCfixer.exe

nvflash64.exe --save oldifr.ifr open file in hex editor, set everything past offset 0x5568 to just 00s. save as whatever.ifr nvflash64.exe --flashinforom whatever.ifr

Not like the “damage” will ever be obvious, and it really is 2 minute fix if you care.

It is recoverable, you can flash the card back to new using nvflash. Instead of flashing VBIOS, you dump the infoROM, zero out the relevant sections, and reflash the infoROM.

Hmm okay, I will test it later today https://drive.google.com/file/d/15QqNswqx0Q9EClIuAq0ifLXyBItVasFJ/view?usp=sharing this one is known good, just wanted to make one based off the latest

ROG MAXIMUS Z790 APEX 9909 for 3+ GPUS (Must use USB BIOS Flashback, rename to MZ790A.CAP) ROG MAXIMUS Z790 APEX ENCORE 9909 for 3+ GPUS (Must use USB BIOS Flashback, rename to A5470.CAP) Let me know if these work

Cool! I couldn’t get much more than 2400 either on TU104 and that was on geekbench which is way way easier

https://drive.google.com/file/d/1ez7KYo6CGTkVmKIdGhS3EBokUuBO1N_q/view?usp=sharing Latest MemTweakIt (fixes 14700K)

MZ690A.CAP like detailed in the normal bios downloads on asus support page. Or you can use biosrenamer.exe that is included with the downloads there

Chrome is weird and requires you to copy the link and open it in a new tab, middle click might work too. I think it was Firefox that just worked as expected.

https://drive.google.com/file/d/1o2vVkMRurpZpaJ9OAf1f1pCPWTiqHj3M/view?usp=sharing You can try flashing this bios with USB BIOS flashback and seeing if it makes a difference, but it's interesting that it worked on the hero. If that one doesn't work, I posted another one I did in a slightly different way on discord bios mods channel

I tried again earlier this month using tweaks from gskill but they don’t seem to help on AMD and 5675 is really hard on my chip, needs perfect temp control. Also I couldn’t get the memory stable again I tried running it on my B550-I which can run 5200 CL16, but for some reason the CB on that board is -120 instead of -145 😔

need bm 11.3

Definitely will! Amazing job and amazing generation!

Check effective clock :(

Thanks for breaking the ice :D