alexmx

http://browser.geekbench.com/geekbench3/8456093

Hi, thanks for sharing I have a 480 dead to be cut but only pin out stopped me from doing the tests. I don't have a 480 alive. Up6210 takes the 12v from pcie, did you connect 12v from atx to pcie?

Grazie Nick, thanks bro

I made that phase for quad core loads, is the tiny one, we should try this next time and with a chiller

ohh nice!! I'm so happy! continue.....

Grazie, quelle psc non erano molto buone, se non ricordo male ero a 2400mhz 7-11-8-26 1t tcwl 7 con secondari tirati

good

Man, it's not allowed, see rules again, lucid virtu is clearly reported under "disallowed tweaks"

Yes SoF, there is and it's very simple and legal. Is a bit sad to see that most of guys do not try even the most common tweaks.... gpu 1.46v load, does not seem a good card

Hi Sweet, the card is a 7970, don't know why in validation link is 280x and don't know why it says "Processor is not recognized" I had this card for a few days, I tried but have not solved the problem. I thought it was a system info problem but with 4.30 you can see was the same http://www.3dmark.com/3dm/4752946

This card is not good, I have epower on and do 900/2300 with 1.52v..... On 2001 is very hard, with 173.69 is unstable, max clock 870. I'm tying from 2 hours but can't reach you...

Suzuki I told you last time, I use a waterchiller and hwbot staff confirmed that is fine in enthusiast league so wait me for 01 I'm working on it

Thank you! There was ek wb for the gpu and alphacool mini-blocks for the rams, I added the rams cooling because were very hot. I have a water chiller and the temperature was around 6 ° -10 ° depending on humidity and ambient temp. The problem with this rams cooling is that it is uncomfortable but mostly it kills the flow... I haven't used for any other vga yet...

Nice Doug!

Thank you Andrix, I'll try... have other tweaks to be tested, I can't increace the frequency with water cooling... @Doug If you read this, I solved the problem with cpuz, was the north bridge voltage too low, 0.15 more and no problem

I usually open the second instance when I see the cpu window and works well, I'll try to wait more, thank you

thank you Doug, the error is 0x102, i tried to google it without success. It is strange because cpuz bugs when I try to open it up again for the memories after opened it the first time.

I agree Loud, the best intel single core ever made! Very strong even with water cooling! I can do second place but at 4900mhx cpuz doesn't work properly... I'll try again

grazie matthew

non ancora Stermy, ho acceso ieri per la prima volta questo pc, ho usato il s.o. sporco che ci ho trovato dentro lol

You rock Ramiro! First place with water cooling, congratulations

lol

Complimenti!!!

should be the bios, I had this problem as soon as I flashed the last one but the system still works as a quad channel

I forgot to open details, I'll do it again tomorrow