Jump to content
HWBOT Community Forums

Joa3d43

Members
  • Posts

    114
  • Joined

  • Last visited

Everything posted by Joa3d43

  1. ...same here; 66.9% card is the 1st candidate when I get to sub-0 later, but in the mean time, don't want to fry it on water...btw, I've seen people post elsewhere that they were running 1.47v @ air ~~~(
  2. ...1.4 - 1.42ish (range for 3 cards) on cool water...won't go much higher yet until I really have a grip on these cards /- a bit tricky to get one-size-fits-all vGPU as ASIC ranges from 66.9 to 88.9 % for the trio
  3. Tx Szeged & SDhydro - I may yet mod the Bios towards boost-disabled anyways - just too little time right now as work is super-busy...haven't even done ANY SLI / only a handful single 980 Cl runs...2 of the 3 cards might reach 1800++ w / heavy water-cooling and sane voltages
  4. ...ahh, was wondering...I'll try to add the clocks per GPUz from now on, but real boost w/ boost-enabled Bios and drivers seems to depend on order of ASIC w/ multi-GPUs, even before custom BIOS...and in Unigine 'Valley', the above run settings actually display as '1876MHz' on water which is utter hogwash :-)
  5. ...certainly happy w/ the cards, though I think all 980s react well to good cooling,but Classies' cold plates are a real bonus...cooling system for GPUs = total 1080x60 rads, 3 pumps, uni-blocks, cold water feed etc...trying to keep peak load temps at around 20 c or below
  6. ...thanks guys ;-) ...real boost clock would have been around 1740-50 or so ...the screenshot shows you the nominal ones used; don't know where the once listed above came from as I normally leave that blank due to special Bios / clocks ...LN2 later, after I exhaust whatever headroom I still have left w / o it, but still just exploring these new cards > can hardly wait for 'Big Daddy Maxwell' / AMD 390X / stacked memory if these 980 Classifieds are any indication
  7. ...very nice ! ...4 pts are in back up territory...but look forward to your LN2 results... btw, not my war ;-)
  8. tx DX4PICCO ...combined rad space of 1020mmx 60mm just for GPU, and one rad submerged in cold water; vGPU was 1.385v per EVBot, but just started to run this card last night and haven't put a DMM on it > wondering if 980 Cl actually droops, or behaves like 780 Ti Cl. ...PEAK temps @ 25 c w/ 21 c ambient
  9. ...tx DJ ...there's a bit more 'on the table' but need to learn about those new EVBot settings first
  10. ...nice DJ; now mount that Strix on a mobo w/ dual frozen 18c/36t Xeon v3s, and I bet your Physics scores will go even higher, no ;-) ?
  11. ...wow - superb ! ...and old 580s never die, though they may cause brown-outs in your neighborhood ;-)
×
×
  • Create New...