Doug2507
-
Posts
940 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Doug2507
-
-
Started a couple days ago and made it so far. Working through the thread but I don't have time today
I'll get it done ASAP!
(Caugh caugh)
-
...
-
Great chip. So I'm guessing golden needs to be a sub 1.3 boot.... 0.0
And good chips pot luck!
-
-
Good run Rauf!
-
Only psc required.
-
Aye, not too shabby at all!
-
Cool cool, now get some decent water cooling on it, push it harder and get some benching done!
-
Only plats and psc required now.
-
2 sticks of psc, must have had cold testing and capable of 2666 8-12-8 on air, around 2800 6-10-6 on cold.
-
1
-
-
I'll be joining you with the red! Nice run!
-
Still got the matrix? Decent clocker or average?
-
Incredible chip!
-
-
Superb. Thanks for going to the effort of testing and posting guys.
-
So no need to re apply??
-
They're back...
-
Welcome to the forum and to the world of over clocking!
I can understand where you're coming from with regards to settings in bios for over clocking, good or bad, there are many of us pushing to run faster and as such there are many different opinions on what to do and what not to do!
I'd suggest reading the guides written by very experienced guys that know exactly what they're talking about. Sin has a gigabyte guide for Haswell in the z87/97 over clocking section in the forum. You'll also find an excellent guide by Raja over on the Asus ROG forum. Have a read through these and they should help you get moving.
If you can't find them just shout and I'll link them later on.
-
Anyone had 535's yet?
-
It would be a shame not to put that chip on cold asap. Should be cb 6.1 minimum!
-
-
-
-
Near enough but only way to confirm is with MM.
Gigabyte X99 SOC Force Champion -DDR4
in Memory Heaven (air/extreme)
Posted · Edited by Doug2507
So, anyone had a good play about with sammy e die on this and compared to mfr? Been away with work for a bit and will need to decide if it's worth keeping a quad set of e die at hand for x99.
And what would be the concensus on running 1.9 vdimm on x99.....?