kaliz
Members-
Posts
397 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Blogs
Everything posted by kaliz
-
what went wrong!? i never typed in 7676 that is one thing i am 100% sure off.
-
kaliz - Core i5 12400F @ 5824.3MHz - 10sec 160ms PiFast
kaliz replied to phobosq's topic in Result Discussions
my pleasure, it just boots 5757 with 5300 ring and 7000+ memory, able to raise bclk up to 5900MHz but havent been able to use high mem freq on superpi 32m , yet :D -
Dr.Antoine - Core i5 12600K @ 6833.2MHz - 140082 MIPS 7-Zip
kaliz replied to Leeghoofd's topic in Result Discussions
nice thermal grease! -
The HWinfo readout with just 50% core utilization is because of the polling period is set to default 1000ms. If you shorten the polling rate to 200ms your read out are 5 times more accurate ( the sensors will collect data every 200ms instead of every 1000ms it does now, you can find the oprtion in Settings
-
-
I dont want to be harsh but why are you asking these basic knowledge things on a dedicated benchmark and overclocking site? I think you need to start at the very basics and learn. Work your way up with knowledge, read on OCN forums etc. I suggest leave everything CPU wise stock and make a stable RAM profile first, go from there. Good luck
-
just grabbed my taichi lite B650E +7800X3D system and ran some bclk OC ycruncher. the zentimings is open for inspiration, once you get the feeling for it its not that hard gotta tell you, i overclock everything DDR4 and DDR5 and X3D overclocking is totally different than anything with a multiplier and voltage input., so be prepared for a learning curve
-
it is a great board for eclk OC on all my AM5 CPUs, its miles better at RAM OC vs a cheaper B650 board and eclk+RAM OC up to 8800 works. The trick is, to use PBO curve optimizer with bclk OC, and make sure you have set up your RAM properly. When using eclk: BOOT: It will first train the 100 bclk timings, after that it will retrain with eclk so its like a double boot. Good luck it a beast of a board.
-
Thanks! I got this X99 mobo just last week, for my old 5820K and a 6900K, i love DDR4 OC on this board 10-10-10 2750 was the 'best' with extreme tight subs, max 3500 12-12-12 but still trying to get it higher more consistent. The 12-12-12 was a little bit faster in 7zip vs 10-10-10. will check out the guide! btw GB3 memory was around 8400 trying to get it 9000+ https://browser.geekbench.com/v3/cpu/9067138
-
nice CPU i dont think mine can do 5875
-
chispy - Ryzen 9 7900 @ 5574.7MHz - 206810 MIPS 7-Zip
kaliz replied to shar00750's topic in Result Discussions
great to see this board in action -
noliso - Pentium Gold G7400 @ 5578MHz - 59sec 10ms y-cruncher - Pi-1b
kaliz replied to chispy's topic in Result Discussions
nice