GtiJason

Why are the competition rankings changing, I thought the invalid submissions were blocked last week?

Wowza, cpu temps from zero to beating cpu utilization like that...makin that HW monitor rain

Thanks for the reply, my first try with the BDBG HyperX 2133c9 set you sold me was promising considering on air 2400 c8 tWCL 6 tRDRD 4 is as good as I could get. Anything in the 1.8 - 1.85v+ on air made for a tough time and I noticed if I raise wcl to 7 allowed more but I try to stick with 6 when possible. I did remove socket but now know not to clog the pins with Di elec grease as this caused me a major headache! as I couldn't even boot past 67 chipset error and cleaning it out was a B!t@h taking 6 hours over 3 days and going through over 20 paintbrushes getting that bunnyextraction out and freeing up my squished cpu pins. HyperX Elpida BDBG 2666 c7 11-7-28-1 MaxxMem http://i.imgur.com/N5peD9J.png Do any of you use either of the SF3D molex heaters or is that asking for trouble?

Do you do anything with the mems pcb? Under the heatspreaders like use Vaseline or shop towels stuffed between bottom of HS and pcb ....etc. I guess I'm just worried since none of my friends care about this stuff or computers in general so just learning as I go. I am super excited to try again this week and now am able to get Lin from the same place I get the Dice since they rent 10L dewers cheap when you buy ln2. They ask $80 for the dewer and 10 L of lin but I get half price on dice because of where I work, and to let others in the area know about them since it is the only place around to get Dry Ice or LN2. Do you guys think $50 for 10L Lin with dewer rental is an ok price because that's what Im aiming for?

Im guessing you are referring to dielectric grease and not petroleum jelly? Sorry to hear about your XTU score in Div 2 . I know the run is legit and I also had my 3dmark 06 score blocked but at least you still won, that says something about how you dominated the rest of us, minus Zwitterion but I think his 4690k was pretty jacked up. I never even got to post my real scores, except xtu because of the problems I was having and still finished 5th with scores I did in under an hour of work, so that score of mine being blocked didnt matter to me since it wasnt even done with the card I use. Websmile is a good guy and has helped me out more than anyone else but damn are they being strict compared to the last round Also do you use Vaseline or armaflex while going cold?

Thanks for the reply, I have cleaned out the socket cause I have been noticing the grease causing contact issues and that was the only spot I had it. I think you are right about either the 24 pin having moisture or maybe even the two 8 pins seemed damp.

Finally gave in and bought the SF3D EK Inflection and Triple Point Evo kits, keep in mind my first time overclocking was in Oct. of 2014 so I'm fairly new to all of this. Tried two sets with the first being XtremeAddicts old Elpida BDBG HyperX 2133C9 T1 kit and 2 of 6 of my PSC XED Trident 2000 9-9-9-24 1.6v kit bought from a gamer in Canada that were barely used and never above 1.5v . minimal results as the Board shut down after 30 minutes and I wasn't taking any chances on a brand new board and just purchased ram. http://i.imgur.com/KjmD3so.png http://i.imgur.com/r2Cc46S.png http://i.imgur.com/Dl0oIKX.png http://i.imgur.com/N5peD9J.png http://i.imgur.com/32CgjSE.jpg Any advice would be greatly appreciated since Im not really sure if I should keep adding fresh dry ice like I was or only at first to bring down temps and then run with the Acetone slush. My board was heavily insulated with 3 layers or Armaflex Tape on the back with Vaseline on ram pins etc. the front had the white kneadable putty, Dieelectric grease in socket some armacell sheets, lots of shop towels etc, but the heatsinks were kept on and the area on edge of board by ram/24 pin was very cold and frozen. I probably need to use Vas/DiElecric grease by 24pin, voltage check points, ram slots?

Yeah, when I first saw that I thought you just had a real nice kit on air but turned around because tRP is usually the weak link since tRCD is usually 12 at ambient , but then I saw the triple point and had to check if you were running a strange elpida kit instead of PSC. My EK/SF3D cpu and ram pot arrive friday, should be interesting since I've never benched below 0C with chilled water. 2800mhz is still good though maybe your kit can do 7-11-6 @ 2666-2700?

Payment Sent, Thanks Sam

Not sure why it keeps saying Trident ram when I am typing in Klevv Urbane , Hynix MFR not PSC X IC's

Payment sent, Thanks Michael

GtiJason has just sent the scrilla via PayPal Thanks for the additional info/pics and for holding them for me Good guy Alex is

I'll take #1, asuming shipping to US zip 53066 isn't crazy

So, you can run your uncore?cache at over 4500mhz but core has to be x45. This is not easily done on many MB's

Just paid for #5, please confirm your Paypal

Thanks Raules...I need me some Sammies since the only sticks I have are HYKO green miracle memory that have a hard time at 2400mhz

I'd like to get one of these mounts but it's hard to find a reputable company that builds/sells Phase Change/Cascade here in the US for decent price. Been looking at Evo Beast/Controlled from Dimastech since they have a location in Florida, but been reading a lot of negative reviews about long wait time and teeny tiny condensers and cheap parts in general. Any suggestions or do I have to take a chance and buy used?

Sorry meant take 5 if 4 is gone

I will take #5 if #4 is gone Price shipped to 53066 Oconomowoc Wi

My bad, I have very little experience with AMD or Older platforms. nnimrod I am willing to give you a good lead for a nice set of Hypers for $50 us. I already spoke with the owner and was going to buy them myself but recently spent over $500 on ram mostly psc-x and bought a Z97 OC Formula today. So PM me if interested for info. Ram is Perfect Storm 2000 8-8-8 . Also BBSE available for $40 2000 9-9-9

So why not get these, 4. 2x G.skill F3-16000CL9D-4GBTD - 45 Euro (80 Euro both sets) 2 sets per 2x2 GB, Elpida BBSE, quick test showed 2400 CL8 isn't hard for them in many cases Elpida BBSE performs better than Elpida MGH-E Hyper/ Elpida MNH-E Hyper. If you check this link and do a search for Trident, 2000, or BBSE you will see a lot of guys use these for SuperPi 32m. http://www.xtremesystems.org/forums/showthread.php?280903-SuperPi32m-5Ghz-Ivy-All-Out-Challenge!

Pretty sure he still has the newer Kingstons CFR 2400's in spot one as I bought spot 2,2133CL9 Elpida BDBG's and another guy took both 2000CL8's

Are the GTX2's Elpida BBSE-DJ-F or MNH-E Hyper IC's

Just received my Kingston HyperX T1's (KHX2133C9AD3T1K2/4GX 2x2 GB Elpida BDBG) Thanks XA, It's a privilege to own them : )

So, who wants to go in on this with me since I can only afford to buy 2 right now