-
Posts
1304 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Rauf
-
-
Got an ETA on the lucky draw prizes?
-
As Lays said, there was a post about it some time ago. I think massman pulled some statistic to show that except for xtu, 3d was actually giving better points than most 2D.
-
-
Stage 3 - Geekbench - URL required or not?
In HWBot general rules its mandantory, but in stage rules only screenshot is needed...
From the comments for the rules:
"GENIEBEN SAYS:
Well I can see why it's confusing. If you use the paid version that displays the score inside the app, then there is no need for a verification link. But if it's the freeware version that sends the score online, we'd have to see it's not a user generated html page with bogus scores."
-
L538B560
VID 1.12/1.136
5.0 cb11.5@1.25v
5.2 cb11.5@1.42v
(No delid, small wc loop, rad sat in icy bucket, lousy tim, 8-10 deg idle/42-44deg load)
New chip? Seems good, but what does it do on normal temps?
-
Dont think so. CMOS cleared right after LN2 session over. And about million frustrating times since then
I isolated it down to a CPU/motherboard combo. I have another i7 6700K to test and an Asus M8G.
For some reason i5 6400 + Z170 xpower cant reboot, stuck at 00 or 30.
But if I swap for an i7 6700K the same Z170 xpower reboots normally.
The i5 6400 that cant reboot on the xpower works fine and reboots on Asus M8G.
I had reboot issues before as well. Bios 1.41 solved them for me on 6700Ks.
-
Gonna give this board a try soon. What bios is recommended? Latest official or any special XOC bioses out?
-
One annoying thing however is that often after a bios flash the board enters a sort of mode where trying to reboot won't work 9/10 times. The errors are persistent and occur both at stock settings and under LN2. Both reboots after bios changes and reboot from windows gets stuck. You have to power off, reboot into bios because board reports failed boot, reboot again and it works most of the time. Sometimes it will take multiple tries to get successful boot. Sometimes a reflash of the bios will help cure this problem, but I'm hoping for a fix in upcoming bioses. I have seen this reported by another user so I'm not alone with this problem.
Bios 1.41 fixed the reboot issue. I can also confir that 4 dimm now work with 1T. Have also done some testing on 4 dimm vs 2 dimm and there is NO performance gain when pushing frequency and timings with both 2 dimm and 4 dimm.
However I have a problem with my board. It's probably just my board, and problem probably occurred during LN2. But it gets stuck with USB over current protection and shuts off after 15 seconds. I've tried to disconnect all USB devices of course but it doesn't help. Looked at the USB ports but they seem fine. Sometimes I can get the board to boot after resetting bios and powering on like 20 times. Then it works for a while, but after a few reboots it's there again. Is there any way to bypass this? Any way to hardmod it or something?
- 1
-
I'll take the cpu pot if it becomes available.
-
Insane speed on these 5960X now!
-
Thanks, so the usual samsung temps
-
Great mems and great score! How much cold do they like?
-
Thanks! I tried cold MFR, but mine are average so Samsungs on air were slightly better. Maybe with cold AFR when they become available...
-
Nice, I have no more backups Will run again tomorrow with ln2 hopefully.
-
Very nice. Hope to see it cold!
-
I'm gonna go cold mems first time tomorrow. MFR...should I expect CBB?
-
-
http://hwbot.org/submission/3016863_minicoopers_xtu_core_i3_6300_716_marks - 102.9 on Asus. Also, my MSI Xpower does the same baseclock as the OCF.
Will be interesting to see how it scales on LN2, but I'm no XTU master...
-
Thanks! They are G.Skill TridentZ, Samsung E-die.
I don't think baseclock is board related...but the OCF is good for XTU!
-
I have so many backups, no need for for you guys to even try
-
-
Thanks all.
No, won't go higher on air.
-
Come on MDD, show us your real results! And show us your mem speeds!
-
There will surely be wallpaper
ObscureParadox - Xeon X5698 @ 6240MHz - 494 cb Cinebench - R15
in Result Discussions
Posted
Good score!