Lays
-
Posts
356 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Lays
-
-
Nice one lays! 480 might be my first also!
Sweet! Looking forward to it.
I need to mod my card and get rid of OCP, then try again perhaps!
-
Nice!
When you said bad news, I was worried that the BIOS flash had gone wrong!
No sir
-
First ever subzero GPU adventure!! Not bad I think
Thanks to SteponZ, K|NGP|N for the tek-9 fat, K404, Bassplayer for helping me out getting ready for this, and helping me through it as well!
-
same error for me, it's triggering me
-
dood this is wprime not pifast :D :D
-
Yep yep yep, new BIOS definitely works!!!!
Haven't tested lower volts yet, but 9000 effective @ 1.775v from DMM working fine!
-
As my colleague said, I am using the outside temp to cool my 560mm radiator. The liquid stays at around -5C during load.
I use 19/13mm hose, 2x 800l/h pumps and EK HWBot Edition VGA water block. Gelid GC-Extreme all over.
So GPU is around 4-5c load?
-
You using a chiller?
What type of volts you using if you don't mind sharing?
Sorry for questions, just curious nice score
-
Tried it as second card? that way you know if card is dead or not showing picture.
Only got it to show up as a secondary card once, it doesn't show anymore and hasn't ever given display output.
-
Just out of curiosity, have you tried running it on a different monitor? I have a monitor here that is very picky about the cards it wants to work with, about half don't display a picture with it.
Tried 2 different monitors, dvi and display port nothin.
I even unhooked the trimpot, turns out the guy thought it was VGPU, was actually VMEM.
Without trimpot, still no display output. I'm 99% sure it's dead.
-
You can check if LN2 mode is enabled with this software https://copy.com/CGLgUGdHMNFMiqIY
Yeah it's enabled.
Here's a picture of the error I keep getting from GPUTweak:
Tried to reflash BIOS:
Tried using safe mode:
-
Latest is 1.1.6.9: http://www.asus.com/us/Graphics-Cards/MATRIX-GTX980TI-P-6GD5-GAMING/HelpDesk_Download/
Also did you short LN2 mode pads? Without this the BIOS switch has no function.
Aww yes 1.1.6.9 is the one I'm on, I couldn't remember the numbers.
Yeah, the old bios was working for me giving 200%.
I shorted ln2 pads with a pencil, it's possible maybe the pencil rubbed off. I will check when I get home, I have a soldering iron now so I can do it properly.
Need to watch some how to guides on soldering first maybe, I've only done it once lol. Don't want to mess anything up!
-
Yes, I get 200% power limit. Do you have LN2 mode enabled? Which version of GPUTweakII?
The newest one from asus site if I remember right.
1.3.0.6? I'm not sure I'm at work right now so I can't check which version.
I'm fairly sure I shut the pc off, flipped to ln2 mode then flashed the bios, restarted pc and I wasn't getting display output for some reason.
Then I flipped to normal mode, and display was working. Then I restarted in ln2 mode and had display, but power limit was 110%.
Maybe the flash didn't work or something, or maybe I didn't flip the switch far enough to ln2 mode.
I'll look when I'm home in 4.5 hours.
-
Flashed it on my Samsung card, got weird "cannot load bios" error from GPU Tweak 2 on startup, power target max %110?
Is it still supposed to be 200% like the other Ln2 bios?
Can't test more as I have to go to work, but I can test more tonight when I get home.
-
For some reason load temps on this thing are like 15c hotter than my 480 & 980 TI Matrix, I think it needs to be delidded or something. Card has more in it I think on water, but load temps 45+ celsius..
Normally my temps on 480 and 980 ti matrix are like 28-32c depending on ambient temp.. Something is fishy
-
Any OC results with it? Just curious.
-
-
-
Let us know how the psc go mate
OK, will do.
-
Disable the voltmod and rule that out as a cause. I know, 1.14v is very safe, but still....
Have you tried wiggling the card in the slot? Wiped the PCI-E fingers down with acetone?
Heatgun the card? Maybe some dry solder somewhere?
I'll try that. To disable mod I just need to solder the wires off the trimpot, correct?
I want to hear back from the guy that sold me it first before I go messing with everything if possible.
To heatgun the card I'll have to remove all the LET as well I'd imagine.
PCI-E fingers don't have a single mark on em, so I think they're OK.
Tried wiggling around in slot as well.
When windows recognized the card when I booted in with IGPU, it showed 0 MB of memory on the card, possibly something is messed up? Or just software bug?
-
I don't think anything that isn't available to the general public should be allowed points personally, to promote fairness and equality.
-
I bought a 5850 off a user here on the forums, it was already trimpot modded for v core voltage, and covered in LET.
Before turning it on, I measured resistance on the trimpot, and found the correct direction to turn the wheel. I turned it to the higher resistance side, to make sure the gpu wouldn't get crazy volts on boot.
It has no display output, v core voltage reading shows 1.14v when inside windows, but no display output.
The vrm heat up, so they're definitely receiving current...
I tried dvi port, and display port. But nothing, just black screen entire time. Tried clearing cmos as well..
Any other troubleshooting I can do? Or is it dead?
-
What specs were they for that cheap?
1600 7-8-7-24
-
Ordered my very first kit of PSC, will test those and mess around for a bit while I save for Z170
@GtiJason linked me a kit on ebay he said could be promising with a good date, it was only like $25 shipped, so I grabbed em up.
[FS] 2x GTX 980 Ti KPE cards
in Sold
Posted
Curious:
Did they have more in them, I see you said they were on Ln2, but only at 1643.
Did you just not push them really high?