Jump to content
HWBOT Community Forums

Vivi

Crew
  • Posts

    2489
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Vivi

  1. Thanks thanks! Nono this photo is fully fresh, using and old square copper pot to cool the VRM of the reference gtx 780 ti to about -30 idle -20 load.
  2. if it doesn't work you can just flash back to other bios so just gogo
  3. I tested the LN2 bios on air and the efficiency is still good (unlike the skyn3t bios on OCN). but i cant get memory clocks to stick, also can't open it in nvidia bios editor it seems locked :<
  4. you can do anything to the card . As long as it "looks" fine when you return it
  5. Hiya guys! I didn't have time to wait for someone to post mods so i just started measuring and the mods are the same as titan regardless of the differences in PCB and resistors, some values just changed. I did the mods and went ln2 -100 on core and -30 on the vrm. 1.51v /1.81v 1681 / 2065 was not hard. Normal bios was used. here are the mods: 100 ohm to these points will give you VCORE. No OVP or OCP thus far, but i didnt really do more than 1.51v so i'll have to see tonight. just a note, this picture is Titan PCB, but the mod is for reference 780 Ti Hynix memory loves volts, yay! memory mod, stock is 1.65, i'm using 1.81v and getting 2200mhz memory. But had to knock it back to 2065 when the core was in the 1600 range because it's a trade off with IMC. If we can get a IMC volt mod maybe that will solve this issue? Because the Hynix can do the clocks the core just cant handle it (or atleast thats how i see it). EDIT: I removed the memory mod pic, there was a mistake on it. it's the same mod as titan so just measure the resistance, should be a bout 3.75k, then remove the vr, then it will be around 17k, then solder 10k vr and turn back to 3.75k here is the LN2 bios. I will test it tonight and let you know how it runs, if it's better than stock bios or not. Download 780Ti LN2 BIOS
  6. heya! thanks for reply, i can select "no team" but there is no "ok" or "Save" button, the only button is "back to profile page" so when i click and and click on "save changes" it doesn't take it. I think the save changes on my profile page is for my "team souith africa" only, there isnt an ok button for my league team. and my pro oc league drop down menu on profile page is grayed out
  7. I can't opt out of pro OC league, it says i cant leave a team because the cup has been running for too long, but it ended a few days ago, so would like to go back to normal league if thats possible, thanks!
  8. check pm! if it happens when cpu goes cold its PCI-E 3.0 issue, make it pci-e 2.0 and you should be fine
  9. we have no peter tan and andre to leak us there valuables!
  10. Vivi

    G.Skill PSC

    please do some tests dude i want to see what they can do air, like 1370 8-12-8 or something 1.9v
  11. @marmott, can anyone wonder in and look or must they have invite? Thanks!
  12. how about commercially un-available hardware like kingpin 780ti? I just want to know if i have to buy a normal 780ti
  13. thats right man! They make OC gpu's but don't support the people who buy it to unlock the power, bad management, there should be 1 universal email for this. like lightning@msi.com and that email replies daily
×
×
  • Create New...