Splave Posted July 20, 2014 Share Posted July 20, 2014 First of all im not a 3d bencher haha but im fairly methodical in my testing so here maybe can be a place to share some tweaks. Special thanks to MikeCDM, ViVi, and PepinorangOC for their input help and counter points. Step 1 get the XTX.t05 BIOS its the best imho, the .t02 seem to have some trouble for me. Step 2 get a hot air / lower power heatgun You need to aim it at that lower mem IC, it gets the coldest being not only closest to the core but all by itself and away from the vrm heat. Around -90c this is the only IC that I see getting frost on it I use this digital heater for eyeglasses but im sure there are plenty of other options The frost king is sealed to the back of the card but also sponges up some of the heat. Here is the idle mem temp at -80c Runs just as good as air cooling memory Tried 2 other sessions without heating that IC and after about 35-40 minutes at -100c it will fail running stock speed. This way I benched 2hours and 30 minutes without issue. I know some people bench -150c without issues but if you cant like me this helped me out alot. Quote Link to comment Share on other sites More sharing options...
Xtreme Addict Posted July 20, 2014 Share Posted July 20, 2014 It;s a good guide Quote Link to comment Share on other sites More sharing options...
Splave Posted July 20, 2014 Author Share Posted July 20, 2014 Thanks big guy! Quote Link to comment Share on other sites More sharing options...
Xtreme Addict Posted July 21, 2014 Share Posted July 21, 2014 From my testing I got similar experience, though for me if mem had cold problem, plastic spraying was enough. Quote Link to comment Share on other sites More sharing options...
Moose83 Posted July 21, 2014 Share Posted July 21, 2014 Curios i have not this issue Quote Link to comment Share on other sites More sharing options...
Splave Posted July 21, 2014 Author Share Posted July 21, 2014 Then you are very lucky! Quote Link to comment Share on other sites More sharing options...
Alex@ro Posted July 21, 2014 Share Posted July 21, 2014 lots of naked psc running behind picture Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted July 21, 2014 Crew Share Posted July 21, 2014 Good stuff splave! My card has this issue for sure. Will heat up that bad boy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.