July 30, 20159 yr Haha, nice What software is able to change multiplier on this platform? Is this something like CRYSTAL CPUID?
July 30, 20159 yr Author Wish that was possible lol....now I need fsb 100 or lower. @Ludek... K10STAT, most cpus ignore the settings in the app, but this one is ok with it.
July 30, 20159 yr How did you get that multiplier? FID 0 in K10Stat should be 4x, not lower. I don't have Turion, but it should be the same, FID 0 is x4. Same applies to Benchbros submission, I don't know how he got that since minimum should be x4. Did you measure by running 1M if that multi is real or you just show (again) how vulnerable is cpuz? Edited July 30, 20159 yr by I.nfraR.ed
July 30, 20159 yr Author How did you get that multiplier?FID 0 in K10Stat should be 4x, not lower. I don't have Turion, but it should be the same, FID 0 is x4. Same applies to Benchbros submission, I don't know how he got that since minimum should be x4. Did you measure by running 1M if that multi is real or you just show (again) how vulnerable is cpuz? Â FID 0 DID 4 Never measured, thing is that it certainly is under the normal minimum (800mhz), everything is extra slow and laggy. There's only so much that cpu'z can do http://valid.canardpc.com/nxudfp I can try with a QL-62 as well, but it should be the same output.
July 30, 20159 yr Yeah, I saw that validation Will have to try it myself and see, but I thought minimum is x4. Never tried actually
July 31, 20159 yr I was able to set 0.5x on some asrock amd board and performance was way way slower than x4. Now that was on AM2/3 and very long time ago.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.