ludek Posted July 30, 2015 Posted July 30, 2015 Haha, nice What software is able to change multiplier on this platform? Is this something like CRYSTAL CPUID? Quote
GENiEBEN Posted July 30, 2015 Author Posted July 30, 2015 Wish that was possible lol....now I need fsb 100 or lower. @Ludek... K10STAT, most cpus ignore the settings in the app, but this one is ok with it. Quote
I.nfraR.ed Posted July 30, 2015 Posted July 30, 2015 (edited) How did you get that multiplier? FID 0 in K10Stat should be 4x, not lower. I don't have Turion, but it should be the same, FID 0 is x4. Same applies to Benchbros submission, I don't know how he got that since minimum should be x4. Did you measure by running 1M if that multi is real or you just show (again) how vulnerable is cpuz? Edited July 30, 2015 by I.nfraR.ed Quote
GENiEBEN Posted July 30, 2015 Author Posted July 30, 2015 How did you get that multiplier?FID 0 in K10Stat should be 4x, not lower. I don't have Turion, but it should be the same, FID 0 is x4. Same applies to Benchbros submission, I don't know how he got that since minimum should be x4. Did you measure by running 1M if that multi is real or you just show (again) how vulnerable is cpuz? FID 0 DID 4 Never measured, thing is that it certainly is under the normal minimum (800mhz), everything is extra slow and laggy. There's only so much that cpu'z can do http://valid.canardpc.com/nxudfp I can try with a QL-62 as well, but it should be the same output. Quote
I.nfraR.ed Posted July 30, 2015 Posted July 30, 2015 Yeah, I saw that validation Will have to try it myself and see, but I thought minimum is x4. Never tried actually Quote
Christian Ney Posted July 31, 2015 Posted July 31, 2015 I was able to set 0.5x on some asrock amd board and performance was way way slower than x4. Now that was on AM2/3 and very long time ago. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.