Massman Posted April 3, 2011 Author Share Posted April 3, 2011 Also a new BIOS for GD-80 - P67A-GD80 bios (10.0b29): http://91.121.148.119/downloads/BIOS/E7672IMS.A0T E7672IMS.A0Q ---> E7672IMS.A0T - Fix hang Entering Setup.interface if sata mode disabled. - Fix VDroop Control function fail in SVID Mode issue. - Fixed the after update Bios system hang issue. - Modify Lan can awake S3/S4/S5 even if Onboard LAN Controller disabled. - Fix a PS2 Mouse/keyboard awake issue. - Fix mouse is abnormal in game page. - Update the Postmsg module - Fix a F11 Boot Menu issue. - Fix G-skill F3-19200CL9D-4GBPIS unstable if XMP enabled. - Fix memory(Corsair CMG6GX3M3A2000C7 4DIMM) XMP Enabled, the system hang 45 - Fix memory(G.skill F3-16000CL6T-6GBPIS)set frequency:1866 timming:6-9-6-24 voltage:1.65, the system keep rebooting. - Fix G-Skill F3-17000CL9Q-16GBXLD boot fail when XMP enabled. - Auto load XMP timing when memory frequency manual mode higher than XMP frequency. - Fixed When installing 3TB HDD and then press F11 to select UEFI DVD, the system will hang in blank screen - Fix the oc profile issue. - Patch memory overclock fail to enable Multi BIOS function issue. - Suppress USB3.0 Legacy Mode Support item for new BIOS spec. - Fix some vcore issue. - Patch the VIA chip USB 3.0 test fail issue. - Fix issue no edit box when double click string control(mouse.c). - Modify some setup string/option Quote Link to comment Share on other sites More sharing options...
Lynch Posted April 4, 2011 Share Posted April 4, 2011 any noticable changes in the UD7 f3h bios? Quote Link to comment Share on other sites More sharing options...
chuchnit Posted April 4, 2011 Share Posted April 4, 2011 any noticable changes in the UD7 f3h bios? Haven't had a chance to even d/l it yet. I'll be trying this week. Quote Link to comment Share on other sites More sharing options...
Kurbel Posted April 4, 2011 Share Posted April 4, 2011 any noticable changes in the UD7 f3h bios? New Beta F3h Fix: VDimm Beta F3g Fix: remove Floppy Support Fix: BCLK 100 Bug: Vdimm GA-P67A-UD5-B3 http://rapidshare.com/files/455812996/7aud53.f3g New Beta F3g Fix: remove Floppy Support Fix: BCLK 100 Quote Link to comment Share on other sites More sharing options...
Massman Posted April 4, 2011 Author Share Posted April 4, 2011 Thanks Kurbel - GA-P67A-UD5-B3 bios (F3g): http://91.121.148.119/downloads/BIOS/7aud53.f3g Quote Link to comment Share on other sites More sharing options...
Diabolo 80 Posted April 4, 2011 Share Posted April 4, 2011 New BIOS in the old Mobo Quote Link to comment Share on other sites More sharing options...
stasio Posted April 5, 2011 Share Posted April 5, 2011 (edited) I try with SPIFlash,but didn't work, dated 26.Feb 2008 (Ver.1.20). What is the "MAGIC"? Anybody has newer SPIFlash to cross flash the BIOS (Ver.2.xx)? Edited April 5, 2011 by stasio Quote Link to comment Share on other sites More sharing options...
Diabolo 80 Posted April 5, 2011 Share Posted April 5, 2011 (edited) No MAGIC! GA-P67A-UD5-B3 - F3c mod for B2 http://zalil.ru/30795498 GA-P67A-UD5-B3 - F3g mod for B2 http://zalil.ru/30795516 Use @BIOS for FLASH All works fine, more stable, but i have some problem: EasyTune6 can't detect CPU freq and i can't change BLCK in Windows. Thanx mayak for mods Edited April 5, 2011 by Diabolo 80 Quote Link to comment Share on other sites More sharing options...
dinos22 Posted April 5, 2011 Share Posted April 5, 2011 have you installed Windows Management Instrumentation software from the website, if not thats probably why you cant get full functionality of ET, either that or some bios related issue. Quote Link to comment Share on other sites More sharing options...
Diabolo 80 Posted April 5, 2011 Share Posted April 5, 2011 have you installed Windows Management Instrumentation software from the website, if not thats probably why you cant get full functionality of ET, either that or some bios related issue. Yes, i have instaled WMI software but ET6 don't work Quote Link to comment Share on other sites More sharing options...
dinos22 Posted April 5, 2011 Share Posted April 5, 2011 must be something to do with the bios mod then Quote Link to comment Share on other sites More sharing options...
stasio Posted April 5, 2011 Share Posted April 5, 2011 No MAGIC!GA-P67A-UD5-B3 - F3c mod for B2 http://zalil.ru/30795498 GA-P67A-UD5-B3 - F3g mod for B2 http://zalil.ru/30795516 Use @BIOS for FLASH All works fine, more stable, but i have some problem: EasyTune6 can't detect CPU freq and i can't change BLCK in Windows. Thanx mayak for mods Ahh,how to contact Mayak? I have UD7-B2. Quote Link to comment Share on other sites More sharing options...
Lsdmeasap Posted April 5, 2011 Share Posted April 5, 2011 (edited) must be something to do with the bios mod then Yes, must be caused by BIOS mod then I think. I use B3 BIOS on B2 and can change Bclk with ET no problem, only tested UD7 though. Thanks for helping out Stasio guys! I am unable to help from my end or I would get in big trouble, so I was hoping one of you guys could help him or I've been trying to find a method from someone so I could mod BIOS ID for him. SO when using this BIOS mod auto recovery doesn't kick in due to mis-matched BIOS ID's, or are you quickly flashing the backup BIOS to B3 as well? Edited April 5, 2011 by Lsdmeasap Quote Link to comment Share on other sites More sharing options...
Falkentyne Posted April 5, 2011 Share Posted April 5, 2011 Big question is Does that mod for B2->B3 fix LLC1 on UD5? Wonder why no B2 version fix ever came out...when F1 version of B3 was dated OLDER than the latest B2 beta? Was LLC1 overshooting on B2 a BIOS problem or was it hardware? Quote Link to comment Share on other sites More sharing options...
Lsdmeasap Posted April 5, 2011 Share Posted April 5, 2011 Hahaha, why everyone so mad about LLC1, is it really that bad on UD5? I see same complaints on UD4/UD7 too, but all seems fine to me? Quote Link to comment Share on other sites More sharing options...
Diabolo 80 Posted April 5, 2011 Share Posted April 5, 2011 I dont have problems LLC1 on my UD5 whith different ver. BIOSses B2 or B3 Quote Link to comment Share on other sites More sharing options...
Falkentyne Posted April 5, 2011 Share Posted April 5, 2011 Wait, are you sure? LLC1 on the B2 bios would overvolt by 0.05V+ over 1.4v, and LLC2 would overvolt by 0.15v and crash the system. This was fixed on F1 BIOS on the B3 board...so the B2 board crossflashed with F3g doesn't overvolt with LLC1 anymore? Quote Link to comment Share on other sites More sharing options...
Massman Posted April 5, 2011 Author Share Posted April 5, 2011 - P67A-UD5 bios (F3g1): http://91.121.148.119/downloads/BIOS/7aud53.f3g1 (B3-BIOS mod, click for info) - P67A-UD5 bios (F3c1): http://91.121.148.119/downloads/BIOS/7aud5.f3c1 (B3-BIOS mod, click for info) Quote Link to comment Share on other sites More sharing options...
stasio Posted April 5, 2011 Share Posted April 5, 2011 (edited) Diabolo 80, thanks a lot,done!! Modded BIOS UD7-B3=>B2: http://www.fileden.com/files/2009/12/20/2696817/P67aud73-B2.zip GA-P67A-UD4-B3 - F3d* http://ifolder.ru/22793048 Edited April 6, 2011 by stasio Quote Link to comment Share on other sites More sharing options...
Massman Posted April 5, 2011 Author Share Posted April 5, 2011 Modded BIOSes for B2 GIGABYTE boards. The original BIOS was for B3 boards. End-users found the bios to be stable. - P67A-UD5 bios (F3g1): http://91.121.148.119/downloads/BIOS/7aud53.f3g1 (B3-BIOS mod, click for info) - P67A-UD5 bios (F3c1): http://91.121.148.119/downloads/BIOS/7aud5.f3c1 (B3-BIOS mod, click for info) - P67A-UD7 bios (F3h1): http://91.121.148.119/downloads/BIOS/P67aud73.f3h1 (B3-BIOS mod, click for info) Quote Link to comment Share on other sites More sharing options...
Diabolo 80 Posted April 5, 2011 Share Posted April 5, 2011 GA-P67A-UD7-B3 - F3h* mod for B2 http://ifolder.ru/22793067 GA-P67A-UD4-B3 - F3d* mod for B2 http://ifolder.ru/22793048 Thanx mayak for mods Quote Link to comment Share on other sites More sharing options...
Massman Posted April 5, 2011 Author Share Posted April 5, 2011 - P67A-UD4 bios (F3d1): http://91.121.148.119/downloads/BIOS/p67aud43.f3d1 (B3-BIOS mod by Mayak, click for info) Quote Link to comment Share on other sites More sharing options...
Bullet1 Posted April 5, 2011 Share Posted April 5, 2011 Are those bioses good only for B2 boards or the changes affect B3 board performance (in 2d/3d)? Quote Link to comment Share on other sites More sharing options...
Massman Posted April 5, 2011 Author Share Posted April 5, 2011 Those BIOSes are have B3 base, but modified for B2 boards. I don't think there is many changes. B2 and B3 are identical for BIOS. Quote Link to comment Share on other sites More sharing options...
stasio Posted April 5, 2011 Share Posted April 5, 2011 (edited) All works fine, more stable, but i have some problem: EasyTune6 can't detect CPU freq and i can't change BLCK in Windows. Thanx mayak for mods For me all OK ,with ET6. Only thing CPU-Z read as P67A-UD7 (no "-B3"). AIDA64,ET6...OK. Flashed with QFlash to F2;F3c and back to F3h...no problem. Thanks Diabolo 80 and mayak for mods. Edited April 5, 2011 by stasio Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.