Jump to content
HWBOT Community Forums

(FS)Good Skylake CPUs/ B-Die TridentZ


websmile

Recommended Posts

  • Administrators

Hi,

welcome to the first part of my 1151 sellout, three out of four listed cpus can go immediately but I will make a thread with boards as well and need cpus until I have time to finalize this. All cpus have been tested on average air cooling and below par cpu clocking board Hero VIII, I do not have an ocf or gene/extreme and water cooling chiller like the usual offers here, so I tested boot and Hwbotprime at 5ghz for the i7s and Cinebench/XTU for the i5 at 4,8ghz.

 

jd801426llp1c.jpg

 

CPU

 

1. Intel Core i7 6700K

 

Batch L547C185, delidded with LM, very strong chip that did 1,35v 5gzhz win7x64 for me and 1,37v hwbotprime including result saving^^. If you plan to use it on cold, you have to redelid it for LN2 use and change paste

jd801427kxs5t.jpg

 

2. Intel Core i7 6700K

 

Batch L604F281, non-delidded, good chip that does win7x64 1,40v and 1,42v hwbotprime including result save and screen.

 

jd801428lzryt.jpg

 

3. Intel Core i5 6600K

 

Batch L536B345, non delidded, tested for Cinebench 15 4,8ghz 1,29v and XTU 1,33v, this was already above limit for my cooling nearly, the chip runs very hot. 5ghz win7x64 on Impact with boxed cooler 1,40v :D

jd801429anu2j.jpg

 

 

4. Intel Pentium G4400

 

L526C255, non delidded, 4,75ghz wprime 1024 around 1,4v, not more tested.

 

jd8014301pxqq.jpg

 

5. 2x8GB G.Skill TridentZ DDR4-3600 C17-18-18-38 1,35v

 

SN 1610A500xx79/80, way above average kit that easily did 2000 12-12-12-28 1t 220 tight for me around 1,95v, might work even a bit lower. In original packaging

 

jd801431evs6x.jpg

 

6. 2x8GB G.Skill TridentZ DDR4-3600 C17-18-18-38 1,35v

 

SN 1610A500xx61/62, very similar to kit above but needs bit more volts, so I only tested Spi32m 3866 12-12-12-28 1T 220 tight 1,85v and 4K only XTU and geekbench at 1,95v. In original packaging

 

jd801432xksvk.jpg 3866c12185v61tightknpz5.jpg

 

Prices in Euros, shipping not included

1. 500 Euros sold

2. 370 Euros sold,

3. 260 Euros sold

4. 65 Euros

5. 180 Euros sold

6. 160 Euros

 

All items are located at Berlin, germany. Shipping in EU with DHL will be around 20 Euros for the K-cpus, with deutsche Post mems and 4400 can be shipped cheaper, depending on insurance, please ask for a quote if you are unsure what to chose. Payment is possible with paypal or wu, buyer covers fees, this is not negotiable.

 

Disclaimer: No returns accepcted, I also rule out warranty provided by me because this is a private sale. On oc, ymmv, but I used neither good cooling nor infamous top oc boards for the cpus, and the mems were tested up to 3866 on Hero and only above on Impact.

Edited by websmile
Link to comment
Share on other sites

Guest george.kokovinis

 

All cpus have been tested on average air cooling and below par cpu clocking board Hero VIII, I do not have an ocf or gene/extreme and water cooling chiller like the usual offers here.

Ha !

Love it !

Honesty, the privilege of very few.

GLWS Michael.

Bump for one of my best friends here.:)

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...