ale belo Posted March 25, 2018 Share Posted March 25, 2018 Nice one bro! Quote Link to comment Share on other sites More sharing options...
Noxinite Posted March 25, 2018 Share Posted March 25, 2018 Nice board! Quote Link to comment Share on other sites More sharing options...
rsannino Posted March 26, 2018 Share Posted March 26, 2018 WOW GREAST SCORE!!! ;) Good job! Quote Link to comment Share on other sites More sharing options...
cnzdrn Posted March 26, 2018 Share Posted March 26, 2018 Thank you guys :-) Quote Link to comment Share on other sites More sharing options...
Jokot Posted March 26, 2018 Share Posted March 26, 2018 Damn, really nice fsb for a 990fx board Quote Link to comment Share on other sites More sharing options...
yosarianilives Posted March 26, 2018 Share Posted March 26, 2018 No dropped channels! Â Quote Link to comment Share on other sites More sharing options...
cnzdrn Posted March 26, 2018 Share Posted March 26, 2018 Maybe my board is lucky, i've tried some other board and i can't go over 370. If you boot in dual channels you don't lose it when you raise in windows. I think i can do better, in single i can go up 425 with best dram (see wprime sub) with second module i can go up 412. Quote Link to comment Share on other sites More sharing options...
yosarianilives Posted March 26, 2018 Share Posted March 26, 2018 38 minutes ago, cnzdrn said: Maybe my board is lucky, i've tried some other board and i can't go over 370. If you boot in dual channels you don't lose it when you raise in windows. I think i can do better, in single i can go up 425 with best dram (see wprime sub) with second module i can go up 412. I haven't been able to go over about 320 without dropping a channel on any of the sempys I binned so far on any board I own, but I've also only had the cpu on ss with chipset on air. Perhaps I need to put both on dice. I did find that slamming all the secondary voltages helped a bit, including dram, so perhaps I need some d9s to push above the 2.2v I feel safe with on my hypers. Quote Link to comment Share on other sites More sharing options...
Noxinite Posted March 26, 2018 Share Posted March 26, 2018 I never tried raising in OS, but I think I managed to boot upto 420MHz with single channel on my 990XA-UD3 (all ambient). However, I don't remember what the maximum dual channel boot was. Edit: 2.2V on hypers?! Quote Link to comment Share on other sites More sharing options...
yosarianilives Posted March 26, 2018 Share Posted March 26, 2018 3 minutes ago, Noxinite said: Edit: 2.2V on hypers?! They didn't seem to mind, actually they kinda enjoyed it. Just need some air flow. Let me do 1750 6-6-6 with just about all the subs the chv gives minned out. Also had to max vdda and vddr to get the IMC to be happy, along with a generous dose of cpu-nb. Vcore only wanted like 1.7v though. Quote Link to comment Share on other sites More sharing options...
Noxinite Posted March 26, 2018 Share Posted March 26, 2018 I've had 2-3 sticks develop weird timing walls or start to fail 32M when using between 2-2.05V (bios) for a long period of time (over a year). Quote Link to comment Share on other sites More sharing options...
cnzdrn Posted March 26, 2018 Share Posted March 26, 2018 On air i can boot at 360 with dual and 390 in single. I use elpida bbse at 1,8v, if i raise the dram voltage over 1,85 i lose stability/ dual. If you boot at 420 you can reach at least 450 in windows! With hypers i can boot at 345. I use all voltage at stock exept vcore 1,75, 1,5v on cpu-nb and 1,8 dram. I'll try to raise vdda and vddr :) Quote Link to comment Share on other sites More sharing options...
Noxinite Posted March 27, 2018 Share Posted March 27, 2018 I might pull the board out of storage and have a test then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.