Members GeorgeStorm Posted March 27, 2018 Members Posted March 27, 2018 This is a Q8200S not Q8200 it seems :) Quote
bolc Posted March 27, 2018 Posted March 27, 2018 damned I didn t see that. I will take a picture of the cpu to make sure when my spi32m run is over. I would be pissed if that is the case... Quote
bolc Posted March 27, 2018 Posted March 27, 2018 (edited) umounted it and read q8200, hence my first guess, but the code name is SL9GT... so Q8200S... will have to move everything to this category. The scores were amazing though... Edited March 27, 2018 by bolc Quote
Noxinite Posted March 27, 2018 Posted March 27, 2018 (edited) It's definitely a nice chip and it's great to see others having fun on 775 as well! Edited March 27, 2018 by Noxinite Quote
bolc Posted March 27, 2018 Posted March 27, 2018 (edited) http://hwbot.org/submission/3818758_bolc_pifast_core_2_quad_q8200_25sec_280ms it is really good man, I used my 2nd best or what I thought was my 2nd best ep45 ud3p to bench it on a 240mm AIO, went from 1.64 to 1.70 V, and the cpu went all the way to 565 max fsb... which is pretty much the max fsb of my best ud3p on quads, so far. ok I pushed further vtt and nb to get there on this board, but it may surely do close to 570 on the other board /and/or on cold if I didn t hit the chip fsb wall. it gave me some practice at least and some fun, I was happy to best scannick Edited March 27, 2018 by bolc Quote
Members GeorgeStorm Posted March 27, 2018 Author Members Posted March 27, 2018 Being able to clock higher on aio and low volts compared to ln2 and much higher voltage should have set off some alarm bells But yeah nice chip still! Quote
bolc Posted March 27, 2018 Posted March 27, 2018 (edited) I just benched a q9400 slb6b coeff x8 and had no trouble with the aio for similar voltages, so there was nothing to worry with the q8200 coeff x7 http://hwbot.org/submission/3817911_bolc_superpi___32m_core_2_quad_q9400_10min_54sec_78ms and now I am quite sure I should be able to take #2 rank with this board for max frequency, if the cpu does not wall...http://hwbot.org/benchmark/cpu_frequency/rankings?hardwareTypeId=processor_1692&cores=4#start=0#interval=20 Edited March 27, 2018 by bolc Quote
bolc Posted March 27, 2018 Posted March 27, 2018 on the q9400, looks like I hit the wall at 561.7 ... life could be worse http://hwbot.org/submission/3818943_bolc_cpu_frequency_core_2_quad_q9400_4493.62_mhz Quote
bolc Posted March 27, 2018 Posted March 27, 2018 also looks like spi1M is for me tomorrow with 546ish fsb I should get below 11.500 http://hwbot.org/benchmark/superpi_-_1m/rankings?hardwareTypeId=processor_1692&cores=4#start=0#interval=20 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.