K404 Posted June 9, 2009 Posted June 9, 2009 (edited) Fingers crossed for ya idea (not tested yet) this gets worse from 933MHz. Edited June 9, 2009 by K404 Quote
t0mz0r Posted June 9, 2009 Author Posted June 9, 2009 Fingers crossed for ya idea (not tested yet) this gets worse from 933MHz. Thanks yeah, its kinda the same deal here, limits for me are around 800 MHz but depending pretty much on the board. Or at least so it seems Quote
t0mz0r Posted June 10, 2009 Author Posted June 10, 2009 No luck under cold Noted a strange thing on the Asrock tho - it detects three ram sticks installed (bios post reads "triple-channel" as opposed to "dual-channel" when only running two), but it still will only count "4095" MB. Quote
Massman Posted June 11, 2009 Posted June 11, 2009 That happens sometimes here as well ... bandwidth should still be triple channel. Quote
t0mz0r Posted June 11, 2009 Author Posted June 11, 2009 Hmm, not here tho - at least in terms of measurable numbers, where its about 2/3'rd of what you'd normally expect to see Quote
K404 Posted June 12, 2009 Posted June 12, 2009 I've managed to get 970MHz RAM to boot fine in tri-channel mode but so far I dont have the stability (might well be voltage). Once it knocks itself down to 2-channel, stability is much better. Also appears to be more likely to boot into tri-channel mode from a cold boot before the chip has risen up to stable running temp I need sooo much more test time... the stuff I have to get done just stretches off into the future Quote
thebanik Posted September 17, 2009 Posted September 17, 2009 Its happening with me too...3 different Ram kits used, 2 different motherboards and 2 processors....... Ram kits are , Corsair 1600Mhz CL9, Gskill Trident CL6 and OCZ 1600Mhz CL8, CPUS are i7 950 and 920, mobos are MSI eclipse and DFI UT4? or whatever is their top model.... On MSI all 3 kits would only show up as 2048MB or 4096MB under BIOS, though BIOS does show all 3 channels being used, CPUZ will read all 6GB but Windows would say only 2048 or 4096MB usable (whatever BIOS shows). On DFI, gskill shows up as full 6GB but the rest of the kit would come up again as 2048MB or 4096MB.... Sadly didnt even knew this issue existed because I use a 32bit Win7/XP and do not need the extra memory anyways, till a few days ago a friend came up to troubleshoot his DFI mobo... Quote
thebanik Posted September 17, 2009 Posted September 17, 2009 Its happening with me too...3 different Ram kits used, 2 different motherboards and 2 processors....... Ram kits are , Corsair 1600Mhz CL9, Gskill Trident CL6 and OCZ 1600Mhz CL8, CPUS are i7 950 and 920, mobos are MSI eclipse and DFI UT4? or whatever is their top model.... On MSI all 3 kits would only show up as 2048MB or 4096MB under BIOS, though BIOS does show all 3 channels being used, CPUZ will read all 6GB but Windows would say only 2048 or 4096MB usable (whatever BIOS shows). On DFI, gskill shows up as full 6GB but the rest of the kit would come up again as 2048MB or 4096MB.... Sadly didnt even knew this issue existed because I use a 32bit Win7/XP and do not need the extra memory anyways, till a few days ago a friend came up to troubleshoot his DFI mobo... Quote
t0mz0r Posted September 17, 2009 Author Posted September 17, 2009 (edited) In my case it worked out with replaced parts - turned out to be that old issue with the first batches of Elpida Hyper chips Edited September 17, 2009 by xt0m typo Quote
ZZLEE Posted November 12, 2009 Posted November 12, 2009 My X58 Sli Evga has this problem I am going to buy a new chip. The first 3 slots out from the chip don't work at all. I tried two different sets of memory chips. the bottom three slots work fine but give only dual channel. slots 3,5,6 work fine but 1,2,4 are dead. I have 6 GB of Mushkin Redline in slots 3,5,6. Thanks fore the thread Quote
ZZLEE Posted November 12, 2009 Posted November 12, 2009 Its happening with me too...3 different Ram kits used, 2 different motherboards and 2 processors....... Ram kits are , Corsair 1600Mhz CL9, Gskill Trident CL6 and OCZ 1600Mhz CL8, CPUS are i7 950 and 920, mobos are MSI eclipse and DFI UT4? or whatever is their top model.... On MSI all 3 kits would only show up as 2048MB or 4096MB under BIOS, though BIOS does show all 3 channels being used, CPUZ will read all 6GB but Windows would say only 2048 or 4096MB usable (whatever BIOS shows). On DFI, gskill shows up as full 6GB but the rest of the kit would come up again as 2048MB or 4096MB.... Sadly didnt even knew this issue existed because I use a 32bit Win7/XP and do not need the extra memory anyways, till a few days ago a friend came up to troubleshoot his DFI mobo... You must be using 64 bit OS to see more than 4GB in windows. Quote
thebanik Posted November 16, 2009 Posted November 16, 2009 You must be using 64 bit OS to see more than 4GB in windows. thanks for the enlightening clarification Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.